FAQ

It is currently Mon May 04, 2026 2:25 am

View unanswered posts | View active topics

Board index » Tech and Fab » Transmissions

All times are UTC - 5 hours [ DST ]

clicking 3 rib

Moderators: Roy, turboblue

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

frankenbuggy06

Post subject: clicking 3 rib

Posted: Mon May 10, 2010 11:28 am

Joined: Mon Oct 22, 2007 10:39 am
Posts: 937
Location: medina, ohio -- wellsville a/c chapter

i've got a 3 rib layin here that when it is in it would click when riding on a angle but not on the flat fround. i think it could be the spiders, but i have no clue i dont know trannys. any help is greatly appreciated.

Top

RaceBugg1098

Post subject: Re: clicking 3 rib

Posted: Mon May 10, 2010 12:03 pm

BOTM Winner

Joined: Wed Nov 07, 2007 2:07 pm
Posts: 1599
Location: Petersburg, Ky

it could just be your cv's

_________________
Maybe you should chug on over to mamby pamby land....

Top

frankenbuggy06

Post subject: Re: clicking 3 rib

Posted: Mon May 10, 2010 12:06 pm

Joined: Mon Oct 22, 2007 10:39 am
Posts: 937
Location: medina, ohio -- wellsville a/c chapter

they're new cv's. and it was doing it before we put them in

Top

Odyknuck

Post subject: Re: clicking 3 rib

Posted: Mon May 10, 2010 12:08 pm

BOTM Winner

Joined: Mon Apr 30, 2007 3:35 pm
Posts: 3097
Location: Rome Ohio

Even new CVs will click if you have over extended there angles and did not clock them.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Top

frankenbuggy06

Post subject: Re: clicking 3 rib

Posted: Mon May 10, 2010 12:21 pm

Joined: Mon Oct 22, 2007 10:39 am
Posts: 937
Location: medina, ohio -- wellsville a/c chapter

the buggy had no rear heigth at all. the axles were almost straight. but not straight

Top

RaceBugg1098

Post subject: Re: clicking 3 rib

Posted: Mon May 10, 2010 12:39 pm

BOTM Winner

Joined: Wed Nov 07, 2007 2:07 pm
Posts: 1599
Location: Petersburg, Ky

my cvs are full race preped and they always click no matter what angle they are at, been that way since I built the buggy, even my old worn out ones click, but I havnt broke one yet (i just jynxed myself) :roll:

_________________
Maybe you should chug on over to mamby pamby land....

Top

frankenbuggy06

Post subject: Re: clicking 3 rib

Posted: Mon May 10, 2010 12:42 pm

Joined: Mon Oct 22, 2007 10:39 am
Posts: 937
Location: medina, ohio -- wellsville a/c chapter

We swapped out the tranny to see if it was it, kept the same cv's in and it dont click with the new tranny.

Top

chris38375

Post subject: Re: clicking 3 rib

Posted: Tue May 11, 2010 10:06 am

WB Videographer

Joined: Tue Dec 25, 2007 12:40 pm
Posts: 1617
Location: selmer tn. pickwick tn.

pull the bellhousing off and check the spider gears could have a tooth broke

Top

RaceBugg1098

Post subject: Re: clicking 3 rib

Posted: Tue May 11, 2010 11:40 am

BOTM Winner

Joined: Wed Nov 07, 2007 2:07 pm
Posts: 1599
Location: Petersburg, Ky

chris38375 wrote:

pull the bellhousing off and check the spider gears could have a tooth broke

or even just pull the drain plug out to see if it looks like a bomb went off

_________________
Maybe you should chug on over to mamby pamby land....

Top

Page 1 of 1

[ 9 posts ]

Board index » Tech and Fab » Transmissions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: