I have 3/4" heim joints to redo my front end, and get rid of bump steer, I hope. The problem is, well, I forgot to get misalignment spacers. What do I need and where do I get them?

_________________
[url=http://www.TickerFactory.com/]

[/url]

Found these, what do you guys think.

http://www.polyperformance.com/shop/Syn ... -p-19.html

_________________
[url=http://www.TickerFactory.com/]

[/url]

where did you get the hiems from they should have the misalignment bushings also. you could try the chassis shop in Michigan by david allen racing. those would work that polyperformance has also. Do you have a fastenall or any other nut and bolt store by you if they don't have it they could probably order them for you.

Here is where I got some...
http://cgi.ebay.com/ebaymotors/3-4-5-8- ... arQ5fParts

_________________
A broken clock is right two times a day.

Just ordered them. Thanks guys.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Those you posted are the high style spacers, you will need the regular ones, try Poske's racing....you can get them fast and cheaper than most stores according to my experience....here is the site....http://www.poske.com

_________________
"Loud pipes saves lives"

????? The high misalignment spacer allows your heim to fully travel without any binding. If your looking to just use a smaller bolt with a big heim thats a different story.

_________________
A broken clock is right two times a day.

I see what you mean.....my bad on that part....I did not know how the ones pictured was made 100%, I thought it was the high-style ones, I do not have them.....I just have the standard ones

_________________
"Loud pipes saves lives"