 |
| WB Contributor |
Joined: Wed Jul 04, 2007 8:25 pm Posts: 1304 Location: tuscaloosa alabama
|
|
If the oil cooler was still cool to the touch after the motor got hot, would be checking my plumbing. I have seen the oil lines hooked up wrong and cause that and eventually ruin a motor. To the best of my knoledge the oil block that bolts on top of the case, the top fitting goes to the in on the oil filter. Out of the oil filter to the cooler then back to the bottom fittng on top of the case. If its plumbed correct and still no change I would chech and make sure the rubber orings that go under the blockon top of the case arent collapse shut. Ive seen that before to.
|
|