| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| ltb 94mm dual port heads http://woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=14806 |
Page 1 of 1 |
| Author: | volksdude2007 [ Tue Feb 05, 2013 4:26 pm ] |
| Post subject: | ltb 94mm dual port heads |
Looking for some stock heads machined for 94mm jugs. Ive got a few sets i was going to have machined ported and valves reseated but didnt want to do all that and not put new valve guides and valves in. I would be looking at $220 just to get the heads done not including the labor and cost for the valve guides and valves i havnt priced that yet. So just trying to see if anyone has a good used ready to go set of heads they are wanting to sell Thanks |
|
| Author: | ericg859 [ Sun Feb 10, 2013 7:12 pm ] |
| Post subject: | Re: ltb 94mm dual port heads |
have new bare vw heads hemi cut with intake valves |
|
| Author: | Red Barron [ Sun Feb 10, 2013 8:40 pm ] |
| Post subject: | Re: ltb 94mm dual port heads |
I would buy a new set of heads, you are not going to spend much more than your machine work and you know they are good. stock heads are prone to cracks from the spark plug hole to the intake and exhaust seats. You may go through buying a few used sets until you find a good pair. Just some advice from an old timer and trusted friend Dave Clark (god rest his soul). 
|
|
| Author: | volksdude2007 [ Sun Feb 10, 2013 10:41 pm ] |
| Post subject: | Re: ltb 94mm dual port heads |
Thanks for the offer and im just gonna fork out the money and buy the big valve heads |
|
| Author: | ericg859 [ Sun Feb 10, 2013 10:49 pm ] |
| Post subject: | Re: ltb 94mm dual port heads |
also have brand new CB heads |
|
| Author: | volksdude2007 [ Mon Feb 11, 2013 5:36 pm ] |
| Post subject: | Re: ltb 94mm dual port heads |
Whats the price on the new heads |
|
| Author: | ericg859 [ Mon Feb 11, 2013 7:47 pm ] |
| Post subject: | Re: ltb 94mm dual port heads |
35.5 x 40mm valves, they have the small spark plug hole n dual springs $570 also new heads for 94mm n hemicut,(cost $60 xtra) with large valves, think they may be 40mm also, no springs $220 ? 724-496-3235 also have 1915 block n scat crank for sale |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|