| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Wtt for front end http://woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=13890 |
Page 1 of 1 |
| Author: | Go big r go home [ Mon Jul 23, 2012 1:12 pm ] |
| Post subject: | Wtt for front end |
Looking for a nice widened front end in bama I have a good set of cut v treds and a stainless S&w 357 to trade |
|
| Author: | jesse [ Mon Jul 23, 2012 9:38 pm ] |
| Post subject: | Re: Wtt for front end |
are you bj or kp |
|
| Author: | NRIbuggys [ Mon Jul 23, 2012 9:48 pm ] |
| Post subject: | Re: Wtt for front end |
He needs kp |
|
| Author: | dink2275 [ Tue Jul 24, 2012 11:55 pm ] |
| Post subject: | Re: Wtt for front end |
how much for the 357 |
|
| Author: | RMFD [ Wed Jul 25, 2012 12:47 am ] |
| Post subject: | Re: Wtt for front end |
I have a new widened front end with high shock towers on it I'm not sure if it's a ball joint or king pin I will check tomorrow what kind of v treads do you have and what shape is the 357 in |
|
| Author: | Wanted_Fugitive [ Wed Jul 25, 2012 2:14 am ] |
| Post subject: | Re: Wtt for front end |
I dont know the condition of his .357, but his v-treads are demons that have been cut. They have only been used a few times since he has cut them. just guessing they probably have 90% tread left. |
|
| Author: | Go big r go home [ Wed Jul 25, 2012 11:04 am ] |
| Post subject: | Re: Wtt for front end |
357 is in good shape shoots great does the frontend come with arms And spindles |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|