mine should be on its way
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Dry Sump tanks @ Southern Buggys http://woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=12724 |
Page 1 of 1 |
| Author: | RDB#3 [ Mon Dec 05, 2011 11:09 pm ] |
| Post subject: | Dry Sump tanks @ Southern Buggys |
These items have been removed from site>>>> |
|
| Author: | mudd mutt [ Tue Dec 06, 2011 1:12 am ] |
| Post subject: | Re: Dry Sump tanks @ Southern Buggys |
mine should be on its way
|
|
| Author: | ridenrace6 [ Tue Dec 06, 2011 2:07 am ] |
| Post subject: | Re: Dry Sump tanks @ Southern Buggys |
how many quarts do these tanks hold and whats the measurements ? is there a "drain" and "vent" ports or only the "supply" and "return" ports ? also what kind of "filler neck" and "cap" setup does it have ? |
|
| Author: | JeffClay [ Tue Dec 06, 2011 8:36 am ] |
| Post subject: | Re: Dry Sump tanks @ Southern Buggys |
I got one that chuck made, it uses an expanding rubber, universal cap, he told me they hold about 9 qts., mine had a suction filter that threaded into the backside that would also act as the drain I would assume. I'm pretty sure it had a vent hole, too. These look about the same as chuck's, so I would expect the same specs. |
|
| Author: | darrell [ Tue Dec 06, 2011 11:48 am ] |
| Post subject: | Re: Dry Sump tanks @ Southern Buggys |
nice i gave $ 230 dollors for a cb tank. now you cant even get them, looks good. |
|
| Author: | RDB#3 [ Tue Dec 06, 2011 9:22 pm ] |
| Post subject: | Re: Dry Sump tanks @ Southern Buggys |
Thanks Jeff Clay......They are pretty much everything you said. Size is 13 1/2 " tall 8 1/2" wide and 5" thick. They have a 11/2" tubed hole in the top for a rubber expansion plug. 3/8" pipe thread adapter welded on the side for return. 3/8" pipe thread adapter on the bottom for supply. A RT Angled 3/8 to 1/2 barbed fitting is used in the fittings. I don't weld anything in for a vent because i like to drill a hole for a valve stem so i can pressure bleed the system then put a small tube on the valve stem for a vent/puke tube. I dont install them so it can be put on either side of the tank. I do beleive that im going to start supplying the tanks with the parts to install it for the extra charge of the material so it will be a complete package. If anyone has any suggestions im always open to suggestion........Quality is the wise decision of many alternatives. |
|
| Author: | RDB#3 [ Fri Dec 23, 2011 8:22 pm ] |
| Post subject: | Re: Dry Sump tanks @ Southern Buggys |
New VW pattern!!! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|