looks good rodger
i think i will try a set for 6" filters, how long does it take to get a set made up?
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Powder coated Air filter covers...... http://woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=12647 |
Page 1 of 1 |
| Author: | RDB#3 [ Sun Nov 20, 2011 9:51 pm ] |
| Post subject: | Powder coated Air filter covers...... |
Items have been removed from site>>> |
|
| Author: | Phillip [ Sun Nov 20, 2011 10:03 pm ] |
| Post subject: | Re: Air filter covers...... |
You know i want a set. And you know what color let me know the price |
|
| Author: | ridenrace6 [ Mon Nov 21, 2011 1:26 am ] |
| Post subject: | Re: Air filter covers...... |
how about doing a set and post picks and weigh them so that we know what we are buying? |
|
| Author: | Ridge Rider [ Mon Nov 21, 2011 1:45 pm ] |
| Post subject: | Re: Air filter covers...... |
Are the aluminum covers too heavy? Is that why everyone uses trash cans? I made mine from .063 aluminum. Is that too heavy? |
|
| Author: | RDB#3 [ Mon Nov 21, 2011 10:33 pm ] |
| Post subject: | Re: Air filter covers...... |
Ridge Rider wrote: Are the aluminum covers too heavy? Is that why everyone uses trash cans? I made mine from .063 aluminum. Is that too heavy? I bet those just wrinkle under acceleration!!!!! HaHaHa Actually im trying to make a set of covers that are color matched and affordable...The price of aluminum is to high to have them powder coated and still sell them at a price compared to the aluminum ones. Aluminum is one of 3 things...Expensive,high maintence, or tarnished and an ugly grey color. I will also be selling these in primer for a cheaper price for those who want to paint them themselves... |
|
| Author: | RDB#3 [ Mon Nov 21, 2011 10:36 pm ] |
| Post subject: | Re: Air filter covers...... |
ridenrace6 wrote: how about doing a set and post picks and weigh them so that we know what we are buying? I will post weights after i have made a couple of sets out of different thicknesses to see how thin i can go before they become flimsy like popcans!!!! I will include an unfinished weight and a powder coated weight. |
|
| Author: | ridenrace6 [ Tue Dec 06, 2011 1:29 am ] |
| Post subject: | Re: Air filter covers...... |
any update on these covers yet? |
|
| Author: | pipedope [ Tue Dec 06, 2011 8:15 pm ] |
| Post subject: | Re: Air filter covers...... |
pretty sure you powder coat ur aluminum ones.... |
|
| Author: | RDB#3 [ Tue Dec 06, 2011 9:33 pm ] |
| Post subject: | Re: Air filter covers...... |
I have been waiting on getting a set back from powder coating to have a conclusive weight. I have changed the material thickness to 20 gauge sheet metal. Im impressed with the weight and strenght. I should have weights and a picture of a powder coated set some time before next week. |
|
| Author: | RDB#3 [ Thu Dec 15, 2011 8:51 pm ] |
| Post subject: | Re: Air filter covers...... |
Im at 1lb. 2 ounces average on a raw uncut 4" tall filter cover. Im not going to powder coat the covers due to the difference in carb./link bar setups....i would hate for everyone to have to cut on them after they are powder coated..However if you live close enough you can stop buy and we will fit the covers and send them off to get powder coated . Price will be $50.00 a set for both 4" and 7" covers in raw form. Some light hand sanding may be required to acheive a satisfactory finish around top of filter. I will post price for powder coating and weight of 7" filters tomorrow. |
|
| Author: | RDB#3 [ Fri Dec 16, 2011 8:05 pm ] |
| Post subject: | Re: Powder coated Air filter covers...... |
Heres a powder coated set |
|
| Author: | ridenrace6 [ Sat Dec 17, 2011 4:04 am ] |
| Post subject: | Re: Powder coated Air filter covers...... |
looks good rodger i think i will try a set for 6" filters, how long does it take to get a set made up? |
|
| Author: | RDB#3 [ Sat Dec 17, 2011 1:58 pm ] |
| Post subject: | Re: Powder coated Air filter covers...... |
I've got to make a set for Ron Cummins Sunday. If i send your set with his would that be OK or would you rather me mail them to your address. Just send me a PM with your Phone # and address if you want them sent to your address. |
|
| Author: | ridenrace6 [ Sun Dec 18, 2011 3:36 am ] |
| Post subject: | Re: Powder coated Air filter covers...... |
RDB#3 wrote: I've got to make a set for Ron Cummins Sunday. If i send your set with his would that be OK or would you rather me mail them to your address. Just send me a PM with your Phone # and address if you want them sent to your address. tim is supposed to be sending me sweatshirt next week so you can just send them with that if its ok with you chris morgan |
|
| Author: | RDB#3 [ Sun Dec 18, 2011 6:48 pm ] |
| Post subject: | Re: Powder coated Air filter covers...... |
Ok, i will make a set and put them to the side then. Thanks |
|
| Author: | ridenrace6 [ Sun Dec 18, 2011 10:21 pm ] |
| Post subject: | Re: Powder coated Air filter covers...... |
RDB#3 wrote: Ok, i will make a set and put them to the side then. Thanks ok thanks i need the ones for six inch filters |
|
| Author: | vwimplant [ Tue Dec 20, 2011 9:27 pm ] |
| Post subject: | Re: Powder coated Air filter covers...... |
yes I want a set of 6 in. please call 205-489-9461. or send your # dnwilliams@centurytel.net |
|
| Author: | ranman17 [ Mon Jan 16, 2012 9:18 pm ] |
| Post subject: | Re: Powder coated Air filter covers...... |
Are you still making the covers. can you call me at 704-400-9684. thank you |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|