Kevins new secret grind cam in his 2***cc woods motor. Made 200 foot pounds of torque at 3900 rpm. Sound did not transfer very good
http://youtu.be/87qUjnvxKrQ
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| dyno run "ky 1600" http://woodsbuggy.com/phpBB3/viewtopic.php?f=5&t=16187 |
Page 1 of 1 |
| Author: | RaceBugg1098 [ Tue Oct 22, 2013 7:29 am ] |
| Post subject: | dyno run "ky 1600" |
Kevins new secret grind cam in his 2***cc woods motor. Made 200 foot pounds of torque at 3900 rpm. Sound did not transfer very good http://youtu.be/87qUjnvxKrQ |
|
| Author: | darrell [ Wed Oct 23, 2013 6:32 pm ] |
| Post subject: | Re: dyno run "ky 1600" |
Getting ready to try this cam just got back from drews.....with 2 gear trans should work out nice pulling the fk-43 out tonight or is it a 110 or c-35  ...
|
|
| Author: | bige70chevy [ Wed Oct 23, 2013 7:59 pm ] |
| Post subject: | Re: dyno run "ky 1600" |
darrell wrote: Getting ready to try this cam just got back from drews.....with 2 gear trans should work out nice pulling the fk-43 out tonight or is it a 110 or c-35 ...its one of those custom ground dale earnhardt cams...14 inches of lift, and its own zip code |
|
| Author: | hyde [ Thu Oct 24, 2013 7:14 pm ] |
| Post subject: | Re: dyno run "ky 1600" |
Drews off road got the cams custom grand for me on hardcore and stroke relieved blanks .This thing has good TQ an HP for eng on pump gas. |
|
| Author: | Rick [ Fri Oct 25, 2013 1:12 pm ] |
| Post subject: | Re: dyno run "ky 1600" |
hyde wrote: Drews off road got the cams custom grand for me on hardcore and stroke relieved blanks .This thing has good TQ an HP for eng on pump gas. Did you also go with the drilled valves 
|
|
| Author: | RaceBugg1098 [ Mon Oct 28, 2013 7:34 am ] |
| Post subject: | Re: dyno run "ky 1600" |
i am pretty certain it does. |
|
| Author: | vwtravis [ Mon Oct 28, 2013 9:20 am ] |
| Post subject: | Re: dyno run "ky 1600" |
148hp at 3900 not bad I would like to see the dyno chart on that run Posted using the WoodsBuggy Mobile App |
|
| Author: | hyde [ Tue Oct 29, 2013 8:16 pm ] |
| Post subject: | Re: dyno run "ky 1600" |
150 tq 2600rpm 200tq 3900 179tq 5000 Sorry i dont have papers with me but i had this on my phone.Eng has Drews off road ported S\E heads & 44 carbes & custom 909 cam |
|
| Author: | hyde [ Fri Sep 26, 2014 8:52 pm ] |
| Post subject: | Re: dyno run "ky 1600" |
RaceBugg1098 wrote: Kevins new secret grind cam in his 2***cc woods motor. Made 200 foot pounds of torque at 3900 rpm. Sound did not transfer very good
http://youtu.be/87qUjnvxKrQ |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|