| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Heim ends and micalinment spacers http://woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=9173 |
Page 1 of 1 |
| Author: | MoblMec [ Mon Mar 29, 2010 6:45 pm ] |
| Post subject: | Heim ends and micalinment spacers |
Ok I bought Heim ends with 5/8 holes for my tie rods . Now I think I need misalinement spacers for the hiems. Trying to decide wich ones , High spacers that turn my 5/8 bolt holes to 1/2 inch bolt holes or regular mislin. spacers that use 5/8 bolts . I guss my question is 1/2 inch grade 8 bolts heavy duty enough for the wheel end of the tie rod??? Anybody have any spacers they want to sell ? Looks like 58.00 from Poly Pro. for 8 spacers. Thanks MoblMec Tim |
|
| Author: | A. Cole [ Mon Mar 29, 2010 9:15 pm ] |
| Post subject: | Re: Heim ends and micalinment spacers |
I run 3/4 heims with misalignment spacers that reduce for a 5/8" bolt. http://cgi.ebay.com/ebaymotors/3-4-to-5-8-HIGH-MISALIGNMENT-SPACER-HEIMS-HEIM-JOINTS_W0QQcmdZViewItemQQhashZitem1c113a9bd4QQitemZ120548137940QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories |
|
| Author: | MadMike [ Mon Mar 29, 2010 11:00 pm ] |
| Post subject: | Re: Heim ends and micalinment spacers |
I run 3/4" heims with 1/2" misalignment spacers, been running them 5 years now. Still have the same ones in now. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|