Here is pics of my set up. It's a Jeffco diff with reverse. The rest is VW based- arms,axles and cv's
"Don't believe everything you read on the Internet."--Abraham Lincoln
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 600cc Ninja powered mini one seater http://woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=17087 |
Page 1 of 1 |
| Author: | taterbug [ Sun Jun 15, 2014 5:30 pm ] |
| Post subject: | 600cc Ninja powered mini one seater |
the reason for posting here is help deciding what rear suspension to use. I want to use VW parts mainly cv joints axles and stuff. I was thinking either a VW style trailing arm suspension or an a-arm type. any thoughts? |
|
| Author: | Psycho Alpha [ Sun Jun 15, 2014 5:51 pm ] |
| Post subject: | 600cc Ninja powered mini one seater |
IMO stick with VW unless you want to get intoA arm susp geometry. "Don't believe everything you read on the Internet."--Abraham Lincoln |
|
| Author: | Psycho Alpha [ Sun Jun 15, 2014 6:00 pm ] |
| Post subject: | Re: 600cc Ninja powered mini one seater |
Here is pics of my set up. It's a Jeffco diff with reverse. The rest is VW based- arms,axles and cv's "Don't believe everything you read on the Internet."--Abraham Lincoln |
|
| Author: | taterbug [ Sun Jun 15, 2014 6:06 pm ] |
| Post subject: | Re: 600cc Ninja powered mini one seater |
where did you get the diff and it had to of been an arm and a leg. |
|
| Author: | Psycho Alpha [ Sun Jun 15, 2014 6:13 pm ] |
| Post subject: | 600cc Ninja powered mini one seater |
Here yea go..... http://www.jeffcoperformance.com/Revers ... rmance.php Not cheap for sure. If you don't need a open differential they is the RPM box, about 1/2 the price. If your not looking for reverse there is even cheaper options "Don't believe everything you read on the Internet."--Abraham Lincoln |
|
| Author: | taterbug [ Sun Jun 15, 2014 6:20 pm ] |
| Post subject: | Re: 600cc Ninja powered mini one seater |
I believe ill do without reverse. how much does your buggy weigh? |
|
| Author: | Psycho Alpha [ Sun Jun 15, 2014 6:30 pm ] |
| Post subject: | Re: 600cc Ninja powered mini one seater |
1300lbs "Don't believe everything you read on the Internet."--Abraham Lincoln |
|
| Author: | Psycho Alpha [ Fri Jun 20, 2014 8:02 am ] |
| Post subject: | Re: 600cc Ninja powered mini one seater |
They do sell couplers to hook bike engines to VW trans axles. You have to turn engine sideways though. "Don't believe everything you read on the Internet."--Abraham Lincoln |
|
| Author: | Odyknuck [ Mon Jun 23, 2014 8:57 pm ] |
| Post subject: | Re: 600cc Ninja powered mini one seater |
If you do not want reverse then using a VW diff with the open holes welded up is another option. |
|
| Author: | trailrider [ Tue Jun 24, 2014 8:12 am ] | ||
| Post subject: | Re: 600cc Ninja powered mini one seater | ||
when i built my motorcycle powered rail I did alot of investigating on trans and gearboxes. The best one out there has to be the Jeffco if you want a diff but it is costly. The RPM is a real good one if you don't want a diff and it is half the price as a Jeffco. The transworks trans does not hold up very well from what everybody told me. You have to turn the bike motor side ways to make this one work. There is a site called minibuggy.net go there and look around.
|
|||
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|