| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 3X3's and axle length question? http://woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=1658 |
Page 1 of 1 |
| Author: | db4spd [ Mon Oct 29, 2007 8:54 pm ] |
| Post subject: | 3X3's and axle length question? |
Just got trough installing a new set of 3X3's and was wondering what the axle length should be with bug trans and type 2 cv joints and bus trans and type 2 cv joints. This is going in a play buggy so i might stay with bug trans beefed up a little rather than the big expense of the 091, not to mention i cant find one around where i live. |
|
| Author: | A. Cole [ Mon Oct 29, 2007 9:05 pm ] |
| Post subject: | |
With bus trans and bus cv on 3x3's, you will need 19 1/4" axles. I don't think you will have enough angle to use type 1 stuff (bug/sedan). If you cant find 091 settle with the cheaper 002 three rib. You deffenintly want to go with a bus trans. though. |
|
| Author: | frankenbuggy06 [ Tue Oct 30, 2007 7:37 am ] |
| Post subject: | |
with the 3x3's you can use a stock bus axle |
|
| Author: | Blake [ Tue Oct 30, 2007 8:37 am ] |
| Post subject: | |
I thought stock bus axles were 18-3/4 to be used with 2x3's? |
|
| Author: | turboblue [ Tue Oct 30, 2007 10:33 am ] |
| Post subject: | |
[quote='frankenbuggy06']with the 3x3's you can use a stock bus axle[/quote] There are three lengths I know of. 18-3/4" 19-1/4" and 20-1/4" I think. I use 18-3/4" for 2x3 and 19-1/4" for 3x3s" |
|
| Author: | A. Cole [ Tue Oct 30, 2007 3:46 pm ] |
| Post subject: | |
Quote: I use 18-3/4" for 2x3 and 19-1/4" for 3x3s"
YES |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|