this is confusing the hell out of me
bee line list theirs as 2" wider x 3" longer
http://www.beelinechassis.com/Extreme.html
and
blind chicken racing list theirs as 2" longer x 3" wider
http://www.blindchickenracing.com/Produ ... _arms1.htm
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| ? about rear trailing arms http://woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=10121 |
Page 1 of 1 |
| Author: | ridenrace6 [ Mon Aug 23, 2010 12:22 am ] |
| Post subject: | ? about rear trailing arms |
i know 3x3 arms are 3 wider and 3 longer and use a 19 1/4 length axle and that 2x3 arms use a stock bus length axle of 18 3/4 but are they 2 back and 3 wide or 3 back and 2 wide? |
|
| Author: | pipedope [ Mon Aug 23, 2010 12:55 am ] |
| Post subject: | Re: ? about rear trailing arms |
2 wider 3 longer |
|
| Author: | ridenrace6 [ Mon Aug 23, 2010 1:14 am ] |
| Post subject: | Re: ? about rear trailing arms |
pipedope wrote: 2 wider 3 longer thanks for clearing that up for me pipedope |
|
| Author: | Dave Winterburn [ Mon Aug 23, 2010 3:22 am ] |
| Post subject: | Re: ? about rear trailing arms |
The more travel you can get, the better. Only had mine running for a few weeks. Lots of quirks to work out and other things to finnish. But, guy's with bad backs were n't sure about having a ride. How ever once they got in and had one, they did n't want to stop and became addicted. I'm running 3X3's with Empi race prep 930's and FOA 14" dual coil shocks rear. 2 1/2"X1 front trailing arms and 8" travel shock with single 18"coil over spring shock front for 12" travel befor the tie rods hit the frame from top to bottom, (while turned) . Suspension seats, hardly even feel a bump. Comfortable, fast, and it's a blast! Dave W. |
|
| Author: | ridenrace6 [ Fri Oct 01, 2010 3:23 am ] |
| Post subject: | Re: ? about rear trailing arms |
according to these theirs are 2 longer and 3 wider http://www.blindchickenracing.com/Produ ... _arms1.htm |
|
| Author: | Rick [ Fri Oct 01, 2010 8:33 am ] |
| Post subject: | Re: ? about rear trailing arms |
you will be happier with arms 2wider and 3longer |
|
| Author: | ridenrace6 [ Thu Dec 02, 2010 5:00 pm ] |
| Post subject: | Re: ? about rear trailing arms |
this is confusing the hell out of me bee line list theirs as 2" wider x 3" longer http://www.beelinechassis.com/Extreme.html and blind chicken racing list theirs as 2" longer x 3" wider http://www.blindchickenracing.com/Produ ... _arms1.htm |
|
| Author: | bmoore [ Thu Dec 02, 2010 8:09 pm ] |
| Post subject: | Re: ? about rear trailing arms |
avery arms will make them any way you want them  for my new build im going with 2 wider and 4 longer 
|
|
| Author: | MadMike [ Thu Dec 02, 2010 9:56 pm ] |
| Post subject: | Re: ? about rear trailing arms |
I'm building a set right now, 4 wider 5 longer. |
|
| Author: | bmoore [ Thu Dec 02, 2010 10:04 pm ] |
| Post subject: | Re: ? about rear trailing arms |
MadMike wrote: I'm building a set right now, 4 wider 5 longer. madmike i wish i had half your skill, are you interested in arm request from the public ? ? paid half in advance ofcourse?????
|
|
| Author: | kevin f [ Thu Dec 02, 2010 10:49 pm ] |
| Post subject: | Re: ? about rear trailing arms |
It really depends on how they are built. Normally the first number is the width and the second is the length. I run a 3x2 Mine are 3 inches wider and 2 inches back. It is harder to get a soft ride out of my set up but by only going back 2 inches it takes alot of angle out of my cv joints, thats how i get away with running stock bus joints and never break them. I will shell a tranny before a joint breaks. Ive broke about 10 trannys ans only 1 cv, it sucks it works that way but I deal with it.
|
|
| Author: | passat2800 [ Thu Dec 02, 2010 11:53 pm ] |
| Post subject: | Re: ? about rear trailing arms |
Hi Kevin . I finally got a chance to break into that Passat trans I busted a while back.The welds came apart on the welded up diff.Are you n Ron coming out Sat? |
|
| Author: | passat2800 [ Thu Dec 02, 2010 11:58 pm ] |
| Post subject: | Re: ? about rear trailing arms |
A side shift trans is a little longer so don't forget to factor that in to help. |
|
| Author: | Crash [ Fri Dec 10, 2010 8:55 pm ] |
| Post subject: | Re: ? about rear trailing arms |
ridenrace6 wrote: this is confusing the hell out of me blind chicken racing list theirs as 2" longer x 3" wider http://www.blindchickenracing.com/Produ ... _arms1.htm That would have been a typo. The arms are Wider by Longer. Info is fixed now. Mark |
|
| Author: | ridenrace6 [ Sat Dec 11, 2010 2:21 am ] |
| Post subject: | Re: ? about rear trailing arms |
Crash wrote: ridenrace6 wrote: this is confusing the hell out of me blind chicken racing list theirs as 2" longer x 3" wider http://www.blindchickenracing.com/Produ ... _arms1.htm That would have been a typo. The arms are Wider by Longer. Info is fixed now. Mark thanks for clearing that up
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|