| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| oil cooler http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=7510 |
Page 1 of 1 |
| Author: | jayrod [ Sun Aug 30, 2009 7:43 pm ] |
| Post subject: | oil cooler |
Im relocating my oil cooler, it was inbetween my seats and gas tank etc... So im movin it up into the frame to get more air, my question is does it matter what end is up or down? Meaning the way the oil is flowing. It was sittin vertically before, now will be sloped with the frame. thanks-jayrod |
|
| Author: | chris38375 [ Sun Aug 30, 2009 8:26 pm ] |
| Post subject: | Re: oil cooler |
most ive ever seen is up an down with the oil lines top and bottom,but it really dont matter jus what fits ur car |
|
| Author: | turboblue [ Mon Aug 31, 2009 1:17 pm ] |
| Post subject: | Re: oil cooler |
Fittings come out the sides or top/bottom? |
|
| Author: | jayrod [ Mon Aug 31, 2009 8:48 pm ] |
| Post subject: | Re: oil cooler |
they both come out the same side |
|
| Author: | perrib [ Mon Aug 31, 2009 11:20 pm ] |
| Post subject: | Re: oil cooler |
It does not seem to matter to much. I use to mount mine above the gas tank for air flow kept the fittings horizontal and feed the oil in the top like a radiator. Right now mine are flat and under the fuel tank. |
|
| Author: | turboblue [ Tue Sep 01, 2009 1:00 pm ] |
| Post subject: | Re: oil cooler |
jayrod wrote: they both come out the same side If the cooler is mounted vertical with side inlets I always try to have the "in" at the bottom and the "out" at the top. This should keep the cooler full of oil when operational. That should maximize oil cooling. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|