buckmaster we made mine stick out past the tire about a 1/2 inch. just make sure the tire is not exposed at all ask DVS1 about that
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Need some help on tree bars. http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=3970 |
Page 1 of 1 |
| Author: | Buckmaster [ Sun Jun 01, 2008 6:12 pm ] |
| Post subject: | Need some help on tree bars. |
I need to know how far the back wheel should stick out from the tree bar.I know it is a little bit,but just want to make sure it is not to far.I took a straight edge across the back tire and i have 2.5 in. to the tip of the tree bar.Could some of you measure yours and let me know what yours is.I have a Beeline Cobra frame with firestones. |
|
| Author: | joeyg1112 [ Sun Jun 01, 2008 6:24 pm ] |
| Post subject: | Re: Need some help on tree bars. |
mine are 1.5 in. past my tires |
|
| Author: | Kyle [ Sun Jun 01, 2008 10:26 pm ] |
| Post subject: | Re: Need some help on tree bars. |
buckmaster we made mine stick out past the tire about a 1/2 inch. just make sure the tire is not exposed at all ask DVS1 about that
|
|
| Author: | Roy [ Mon Jun 02, 2008 3:15 pm ] |
| Post subject: | Re: Need some help on tree bars. |
Mine stick out 1/2 inch past the tire. Don't get them to close to the tire or the tire will rub it when it is in full compression. Tack it on then get 5 of your buddies to bounce it hard to compress the suspension all the way to check for clearance. |
|
| Author: | turboblue [ Mon Jun 02, 2008 4:22 pm ] |
| Post subject: | Re: Need some help on tree bars. |
Mine are about two inches from being as wide as the tires.........  That way when I bought the buggy. I need to put weld some spurs on and all would be good then..........  
|
|
| Author: | Buckmaster [ Mon Jun 02, 2008 4:36 pm ] |
| Post subject: | Re: Need some help on tree bars. |
All the info you guys gave me sounds good,i just misunderstood when i was talking to a friend.Thanks for the help. 
|
|
| Author: | DVS1 [ Tue Jun 03, 2008 12:34 pm ] |
| Post subject: | Re: Need some help on tree bars. |
Kyle wrote: buckmaster we made mine stick out past the tire about a 1/2 inch. just make sure the tire is not exposed at all ask DVS1 about that Thats a bad memory I try to forget. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|