I have had several problems with intake gaskets sucking in on my heads.I really got on it at rush Saturday and it happened again. Is there a better gasket or should I make my own to fix this? Has anyone else had this problem? Chad
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Intake gasket problems on super flow heads http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=16388 |
Page 1 of 1 |
| Author: | gasman [ Sun Dec 01, 2013 11:23 pm ] |
| Post subject: | Intake gasket problems on super flow heads |
I have had several problems with intake gaskets sucking in on my heads.I really got on it at rush Saturday and it happened again. Is there a better gasket or should I make my own to fix this? Has anyone else had this problem? Chad
|
|
| Author: | darrell [ Sun Dec 01, 2013 11:57 pm ] |
| Post subject: | Re: Intake gasket problems on super flow heads |
Posted using the WoodsBuggy Mobile App Iran SuperFlow heads on my buggy last year. My intake bolts would loosen and that would happen it happened a couple of times on me. Then I started putting Loctite on the intake bolts and fix the problem if they get a little bit loose that will happen |
|
| Author: | Aaron Creech [ Mon Dec 02, 2013 12:19 pm ] |
| Post subject: | Re: Intake gasket problems on super flow heads |
Leave the gaskets out and use a thin coating of permatex ultra grey. The junk paper gaskets always shrink and get brittle after a few heat cycles. The weight of the carbs makes the problem worse. |
|
| Author: | ron [ Wed Dec 04, 2013 5:26 pm ] |
| Post subject: | Re: Intake gasket problems on super flow heads |
I'm gonna let jesse post some pics of mine lol , and you can see if thezs are what is happening to yours , I've only found one real solution to this problem ! 
|
|
| Author: | jesse [ Wed Dec 04, 2013 8:43 pm ] |
| Post subject: | Re: Intake gasket problems on super flow heads |
It wont let me post them ron Posted using the WoodsBuggy Mobile App |
|
| Author: | ron [ Wed Dec 04, 2013 8:50 pm ] |
| Post subject: | Re: Intake gasket problems on super flow heads |
That suckz for them ! Lmao 
|
|
| Author: | ron [ Wed Dec 04, 2013 8:53 pm ] |
| Post subject: | Re: Intake gasket problems on super flow heads |
Its 518 locktite flange sealent ™ ! Lol |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|