well if u would ever go to joes and put the heads on we would see what it runs like
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 120 cam http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=15998 |
Page 1 of 1 |
| Author: | jesse [ Thu Sep 12, 2013 2:27 am ] |
| Post subject: | 120 cam |
Went ahead and put a 120 in my new build cause we had one all rdy whats your thoughts on it I hope I dont loose to much bottom end its going in a 2221 with dual carbs and trans is 542 and I added some 1.25 rockers with it |
|
| Author: | Aaron Creech [ Thu Sep 12, 2013 9:27 am ] |
| Post subject: | Re: 120 cam |
What cam were u running before? Whats the compression ? |
|
| Author: | jesse [ Thu Sep 12, 2013 12:10 pm ] |
| Post subject: | Re: 120 cam |
Was a 110 and compression will be like 10.7 |
|
| Author: | stillwell1 [ Thu Sep 12, 2013 2:16 pm ] |
| Post subject: | Re: 120 cam |
well if u would ever go to joes and put the heads on we would see what it runs like
|
|
| Author: | NRIbuggys [ Thu Sep 12, 2013 2:28 pm ] |
| Post subject: | Re: 120 cam |
stillwell1 wrote: well if u would ever go to joes and put the heads on we would see what it runs like I heard joe can't get any work done cause you always sittin I his lap..... |
|
| Author: | jesse [ Thu Sep 12, 2013 2:29 pm ] |
| Post subject: | Re: 120 cam |
Damn that's funny and I been staying out his way cause hes has so much going on |
|
| Author: | stillwell1 [ Thu Sep 12, 2013 2:37 pm ] |
| Post subject: | Re: 120 cam |
yep sittin in his lap u caught me 
|
|
| Author: | reno2165 [ Thu Sep 12, 2013 5:34 pm ] |
| Post subject: | Re: 120 cam |
itll probably run damn good since it was free 
|
|
| Author: | NRIbuggys [ Thu Sep 12, 2013 5:56 pm ] |
| Post subject: | Re: 120 cam |
reno2165 wrote: itll probably run damn good since it was free FACT
|
|
| Author: | jesse [ Thu Sep 12, 2013 6:45 pm ] |
| Post subject: | Re: 120 cam |
reno is wrong not free FACT |
|
| Author: | jesse [ Mon Sep 23, 2013 3:15 pm ] |
| Post subject: | Re: 120 cam |
Where is a good site to buy the springs dans I dont see them and os their some better than others |
|
| Author: | hpfreak [ Mon Sep 23, 2013 7:11 pm ] |
| Post subject: | Re: 120 cam |
You have to machine the heads for dual springs Posted using the WoodsBuggy Mobile App |
|
| Author: | jesse [ Mon Sep 23, 2013 8:02 pm ] |
| Post subject: | Re: 120 cam |
I know |
|
| Author: | hpfreak [ Tue Sep 24, 2013 3:49 pm ] |
| Post subject: | Re: 120 cam |
ok i was just a little curious why you dont just send it to the machine shop and let them get the springs? |
|
| Author: | jesse [ Tue Sep 24, 2013 6:11 pm ] |
| Post subject: | Re: 120 cam |
Did not know if their was better brands and figured they would just pick the cheapest |
|
| Author: | hpfreak [ Tue Sep 24, 2013 6:24 pm ] |
| Post subject: | Re: 120 cam |
Good point Posted using the WoodsBuggy Mobile App |
|
| Author: | jesse [ Sun Oct 13, 2013 11:41 pm ] |
| Post subject: | Re: 120 cam |
got to try it out today love this cam put dual springs and 1.4 rockers with it it will turn on up and still has the bottom |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|