| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Engine cylinder Diameter http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=15971 |
Page 1 of 1 |
| Author: | jkeene0317 [ Sun Sep 08, 2013 3:12 pm ] |
| Post subject: | Engine cylinder Diameter |
Does a set of long barrel cylinders have a different base diameter than a set of normal cylinders? I had a block machined for 94's and got it all together and the new cylinders will not fit in the case. The cylinders are long barrels from CB Performance. |
|
| Author: | darrell [ Sun Sep 08, 2013 11:35 pm ] |
| Post subject: | Re: Engine cylinder Diameter |
They are the same going into the block.....just should be longer at the top .....just for shimming reasons |
|
| Author: | jkeene0317 [ Sun Sep 08, 2013 11:39 pm ] |
| Post subject: | Re: Engine cylinder Diameter |
Thats what I thought. The jugs I have will not fit in the current block but it must have been cut wrong. Thanks for the help |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|