Been looking at fabbing up a RE-movable muffler for riding at night or when I wanted it just a little quieter. Picked up a slipon muffler for $25 from a buddy that runs an ATV shop to try and see if it would work. Heres what I came up with. Had to do some modifying but I'm pleased with the end result. Pipe is a Leo Vince slip on, ended up cutting the muffler down about 7 inches or so and re-riveted the end cap back on. Had to cut it down to keep from it sticking down so far and gettin ripped off on a rock or stump. Despite cutting down the muffler as much as I did, and even though its a straight thru design, it's pretty quiet especiall compared to just the unbaffled U-bend header! Took this pic actually before redoing it and cutting down the intermediate pipe that goes into the muffler. It doesn't have the curved shape anymore and it runs straight inline with the Ubend
