WoodsBuggy.com
http://woodsbuggy.com/phpBB3/

good cam ?
http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=13877		 Page 1 of 1
Author:  buggyman20 [ Fri Jul 20, 2012 10:07 pm ]
Post subject:  good cam ?
what would be a good cam to run on my 1641 to give it a lil more bottom end ?
Author:  davehix [ Fri Jul 20, 2012 11:29 pm ]
Post subject:  Re: good cam ?
i always liked a 1641 with a 110.
Author:  ridenrace6 [ Sat Jul 21, 2012 2:10 am ]
Post subject:  Re: good cam ?
i had a 1679 with a 110 cam, 044 heads and a single idf and it ran like hell at least for its size :D
Author:  jayrod [ Sat Jul 21, 2012 2:44 am ]
Post subject:  Re: good cam ?
110 for sure.
Author:  Aaron Creech [ Sat Jul 21, 2012 11:17 am ]
Post subject:  Re: good cam ?
Need more info on the engine. What heads,compression,and carb? In my opinion a 110 is too big for an engine that small especially if your looking for torque.
Author:  hyde [ Sat Jul 21, 2012 7:24 pm ]
Post subject:  Re: good cam ?
Aaron Creech wrote:
Need more info on the engine. What heads,compression,and carb? In my opinion a 110 is too big for an engine that small especially if your looking for torque.

Yes more info . For TQ in a 1641 w100 or scat c25 .
Author:  MickeyMouse [ Sat Jul 21, 2012 7:33 pm ]
Post subject:  Re: good cam ?
jayrod wrote:
110 for sure.


110 is my vote... worked great
Author:  Roy [ Sun Jul 22, 2012 6:01 pm ]
Post subject:  Re: good cam ?
Could just leave the stock cam in it and throw on a set of 1.25 rocker arms. Simple power upgrade.
Author:  buggyman20 [ Mon Jul 23, 2012 10:20 pm ]
Post subject:  Re: good cam ?
im putting a two barrel carb on it
Author:  buckslyr09 [ Fri Jul 27, 2012 12:38 am ]
Post subject:  Re: good cam ?
Just put dual weber 34's on it that really wakes them up...
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/