| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| what bearing brand to use on crank and cam ? http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=10900 |
Page 1 of 1 |
| Author: | giveitagallon [ Tue Dec 21, 2010 10:47 pm ] |
| Post subject: | what bearing brand to use on crank and cam ? |
I would like suggestions on what you guys have had good luck with ? it is a new as41 case and a used 78 crank if it matters . thanks for the imput ! jason |
|
| Author: | davehix [ Wed Dec 22, 2010 1:01 am ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
I use mahle on crank,rods and cam bearings(double trust). |
|
| Author: | hyde [ Wed Dec 22, 2010 5:56 pm ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
I like clevite 77- H on rod bearings & mahle on cam & crank . The H bearing is for high rpm & pressure . |
|
| Author: | turboblue [ Thu Dec 23, 2010 12:47 pm ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
Gotta be careful on Mahle main bearings. They are starting to produce the #2 split main bearing w/o the internal steel backing. You can tell by the Mahle part number. For example the normal all standard size Mahle part number is M70105. The new version without that (IMHO) critical steel backing is SM70105.  Note the S at the start of the part number. You can physically feel the difference in the weight of that bearing. It is so much lighter. |
|
| Author: | davehix [ Thu Dec 23, 2010 1:00 pm ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
My buddy just brought me the part number for those rod bearings couple weeks ago . do they have those in a vw journal? or just the chevy? hyde wrote: I like clevite 77- H on rod bearings & mahle on cam & crank . The H bearing is for high rpm & pressure .
|
|
| Author: | hyde [ Thu Dec 23, 2010 8:53 pm ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
You mite find a clevitte - p bearing in a VW . Some of the german rods & mains bearings have steel back but are hard to get. Call Drews or Davis |
|
| Author: | perrib [ Thu Dec 23, 2010 9:15 pm ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
VW .010 under CB 780P Buick .010 under CB 6010P Checker/O'Rielly often has the Buick ones in stock. |
|
| Author: | hyde [ Thu Dec 23, 2010 9:22 pm ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
perrib wrote: VW .010 under CB 780P Buick .010 under CB 6010P Checker/O'Rielly often has the Buick ones in stock. Thanks Perrib. |
|
| Author: | Odyknuck [ Sat Dec 25, 2010 9:59 am ] |
| Post subject: | Re: what bearing brand to use on crank and cam ? |
I have a new set of Mahle mains still in the box you can have. Give me a call. Steve 216-695-0733 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|