i am also running some on my 2.2, to protect my rad hose and my oil filter because of the tight clearence, jeff has a good point! i havent run mine long enough to answer that
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Wrapping exhaust header http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=10548 |
Page 1 of 1 |
| Author: | Buckmaster [ Sun Oct 24, 2010 8:00 pm ] |
| Post subject: | Wrapping exhaust header |
Have any of you guys ever wrapped your header with exhaust wrap before? I know it helps when a motor is under a hood or enclosed but i was curious if it would help on a buggy motor? |
|
| Author: | Firebug [ Sun Oct 24, 2010 11:55 pm ] |
| Post subject: | Re: Wrapping exhaust header |
I used some on my 2.2 to keep from melting my belt cover. Worked great for that. |
|
| Author: | JeffClay [ Sat Oct 30, 2010 2:57 pm ] |
| Post subject: | Re: Wrapping exhaust header |
i thought about this too buck, but i'm afraid it will get so much mud and water soaked into it and then rot the exhaust? |
|
| Author: | bmoore [ Sat Oct 30, 2010 6:54 pm ] |
| Post subject: | Re: Wrapping exhaust header |
i am also running some on my 2.2, to protect my rad hose and my oil filter because of the tight clearence, jeff has a good point! i havent run mine long enough to answer that
|
|
| Author: | kybuggy1 [ Sun Oct 31, 2010 11:33 pm ] |
| Post subject: | Re: Wrapping exhaust header |
Jeff is right. I've heard it will rust out your header pretty quick. Guess you could unwrap it after a ride to let it dry. I had to wrap a small section of header on my wife's buggy, Im afraid to unwrap it cuz I think there will be nothing there....pipe gone  
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|