WoodsBuggy.com
http://woodsbuggy.com/phpBB3/

what clutch and pressure plate to go with
http://woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=10454		 Page 1 of 1
Author:  vw_brandon [ Tue Oct 12, 2010 11:05 pm ]
Post subject:  what clutch and pressure plate to go with
i got a 1915cc what kind of clutch and pressure plate should i go with?
Author:  Firebug [ Wed Oct 13, 2010 3:35 am ]
Post subject:  Re: what clutch and pressure plate to go with
I like a 6 puck,,and in your case a stage 2 kep pp,,,your likely to get a lot of opinions on this subject,,good luck
Author:  Maddog [ Wed Oct 13, 2010 8:55 am ]
Post subject:  Re: what clutch and pressure plate to go with
Stock plate with 4 puck disk, and you'll be fine.
Author:  MadMike [ Wed Oct 13, 2010 9:21 am ]
Post subject:  Re: what clutch and pressure plate to go with
Stage 2 with a stock disk
Author:  harleyhunter05 [ Wed Oct 13, 2010 12:49 pm ]
Post subject:  Re: what clutch and pressure plate to go with
i use stage 2 pp and stock disk with no problems
Author:  davehix [ Wed Oct 13, 2010 2:57 pm ]
Post subject:  Re: what clutch and pressure plate to go with
stage 1 1700lb and cush loc disk :mrgreen: :mrgreen:
Author:  kevin f [ Thu Oct 14, 2010 8:01 am ]
Post subject:  Re: what clutch and pressure plate to go with
My buggy is pretty heavy with a 2387 and a stock six rib with 35 inch tires. I run a stage 1 with a cushlok and have no probs.
Author:  RaceBugg1098 [ Thu Oct 14, 2010 8:04 am ]
Post subject:  Re: what clutch and pressure plate to go with
stage one and 4 puck!
Author:  PhillipM [ Thu Oct 14, 2010 8:16 am ]
Post subject:  Re: what clutch and pressure plate to go with
We used to get along just fine on a stage 1 and four puck with a 2.3 in the back.
Author:  kyjr.buggy1 [ Thu Oct 14, 2010 12:04 pm ]
Post subject:  Re: what clutch and pressure plate to go with
All i'm gonna run is a stage 2 and stock disc with my 2180 and the new car trans me and Chuck came up with, We'll see how the clutch holds up.
Author:  vw_brandon [ Fri Oct 15, 2010 5:08 am ]
Post subject:  Re: what clutch and pressure plate to go with
i went with a stock kit cost me about 100 bucks im gonna run a stock bug trans
Author:  harleyhunter05 [ Fri Oct 15, 2010 7:41 am ]
Post subject:  Re: what clutch and pressure plate to go with
stock pp isn't strong enough on 1915 , it will slip - been there done that. Better start looking for a bus tranny, when i built my 1915 I blew the ring and pinion out of 3 car trannys in a week :oops: -- better baby it
Author:  vw_brandon [ Fri Oct 15, 2010 3:36 pm ]
Post subject:  Re: what clutch and pressure plate to go with
took it to my local vw guy turns out engine is not a 1915 its a 1835 gonna put a 5 rib in it over the winter
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/