wheels have been sittin outside for a lil while and have the usual dull aluminum look. but I believe with a lil work they'll clean up decent. What kind of aluminum polish do yall use?
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| finallly picked up beadlocks, best place for adapters? http://woodsbuggy.com/phpBB3/viewtopic.php?f=29&t=14946 |
Page 1 of 1 |
| Author: | snail rail [ Mon Feb 25, 2013 10:52 pm ] |
| Post subject: | finallly picked up beadlocks, best place for adapters? |
did quite a bit of searching on here looking for best source for vw 4 lug to circle track wide 5 adapters and is Drews offroad where most everyone is getting theirs? There were some people making/selling them in their spare time on here wasn't there? Anyone still makin them? |
|
| Author: | Huey [ Mon Feb 25, 2013 11:26 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
instigator http://www.woodsbuggy.com/index.php?option=com_jfusion&Itemid=109&jfile=memberlist.php&mode=viewprofile&u=1685is the man who makes them on here. He will even cut your own design into them. Huey |
|
| Author: | Huey [ Mon Feb 25, 2013 11:30 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
Check out this link http://www.woodsbuggy.com/index.php?opt ... eel#p48876 Huey |
|
| Author: | Red Barron [ Mon Feb 25, 2013 11:47 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
Chuck Jones makes them |
|
| Author: | snail rail [ Mon Feb 25, 2013 11:56 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
I thought I'd read in a thread on here that instagator wasn't making them anymore?? I'll shoot him a pm and find out. Thanks guys |
|
| Author: | darrell [ Tue Feb 26, 2013 12:38 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
I got a friend that makes them his name is Jeff 513-276-8896 he will ship them too really nice set of adapters or Drews off road sell them 513-868- 9543 they are $125.00 a set at both places. |
|
| Author: | NRIbuggys [ Tue Feb 26, 2013 11:12 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
I got a set from southern buggys a week ago and they had 2 more sets |
|
| Author: | snail rail [ Tue Feb 26, 2013 4:51 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
how much were the ones at southern buggy if you don't mind me asking? |
|
| Author: | snail rail [ Tue Feb 26, 2013 5:50 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
wheels have been sittin outside for a lil while and have the usual dull aluminum look. but I believe with a lil work they'll clean up decent. What kind of aluminum polish do yall use?
|
|
| Author: | NRIbuggys [ Tue Feb 26, 2013 6:37 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
80 bucks |
|
| Author: | snail rail [ Tue Feb 26, 2013 6:51 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
80 bucks?! that's quite a bit less than others I've seen. Southern buggys is a little bit of a drive from here but I'm guessing they ship em as well? Whats the number for Southern buggy and I'll give him a call tomorrow so I can get these on! They don't have a website or online catalog do they? Thanks again |
|
| Author: | Wanted_Fugitive [ Tue Feb 26, 2013 7:22 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
The number to Southern Buggy is (606) 864-2217. They are located in London Kentucky. I am also needed a set for my new rims which look identical to yours. |
|
| Author: | MadMike [ Tue Feb 26, 2013 8:04 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
$80, how thick are they? Can't be very thick at all for that. |
|
| Author: | NRIbuggys [ Tue Feb 26, 2013 8:10 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
1/2 inch I think. Hell I drove 7hrs to get mine lol and my new oneseater |
|
| Author: | NRIbuggys [ Tue Feb 26, 2013 8:17 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
snail rail wrote: 80 bucks?! that's quite a bit less than others I've seen. Southern buggys is a little bit of a drive from here but I'm guessing they ship em as well? Whats the number for Southern buggy and I'll give him a call tomorrow so I can get these on! They don't have a website or online catalog do they? Thanks again Look at the sponsor page for there info |
|
| Author: | snail rail [ Tue Feb 26, 2013 11:04 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
yeah I already had gotten their number from a buddy, I was just wandering if they had a website but I didn't see one. No big deal I'll give em a call tomorrow. Does anyone know if they take payment over phone & ship parts? For $80 I'm guessing that's without studs? |
|
| Author: | Huey [ Wed Feb 27, 2013 12:18 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
Here is a link to everything I used. Maybe it will help. http://www.woodsbuggy.com/index.php?opt ... 93#p100744 Huey |
|
| Author: | darrell [ Wed Feb 27, 2013 1:08 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
I think Jeff does Southern Buggy's also I bet your gonna pay about the same price 125.00 but i could be wrong. |
|
| Author: | NRIbuggys [ Wed Feb 27, 2013 8:11 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
No studs. I just used big bolts with big lug nuts for the adapter to wheel. Then regular long vw lugs for adapter to hub/rotor. |
|
| Author: | darrell [ Wed Feb 27, 2013 9:47 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
NRIbuggys wrote: No studs. I just used big bolts with big lug nuts for the adapter to wheel. Then regular long vw lugs for adapter to hub/rotor.
|
|
| Author: | darrell [ Wed Feb 27, 2013 9:50 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
darrell wrote: NRIbuggys wrote: No studs. I just used big bolts with big lug nuts for the adapter to wheel. Then regular long vw lugs for adapter to hub/rotor. Yeah with out the lugs and studs sounds about right..... |
|
| Author: | snail rail [ Wed Feb 27, 2013 3:23 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
went ahead and just ordered some from Drews...The way I figure they charge right at $30 extra for studs/lugs and it'd be that much or more from a local parts house.... Well anyways thanks for the help guys. |
|
| Author: | diamonddav [ Thu Feb 28, 2013 2:10 am ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
mothers! and i did mine with the polish ball you stick in your drill.. same wheels they look like chrome  i'd replace all the bolts tho with grade eight!! your not gonna polish those    gotta have some bud light to polish em tho
|
|
| Author: | snail rail [ Thu Feb 28, 2013 8:26 pm ] |
| Post subject: | Re: finallly picked up beadlocks, best place for adapters? |
lol yea I gotta get some new bolts for sure. I worked on the wheels last night when I got off with a mothers powerball and believe it or not they are shiny underneath all that?!?!
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|