| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Cut Mickey T Baja Claws http://woodsbuggy.com/phpBB3/viewtopic.php?f=29&t=12702 |
Page 1 of 1 |
| Author: | MartinB [ Thu Dec 01, 2011 1:25 pm ] |
| Post subject: | Cut Mickey T Baja Claws |
Has anyone run a set of cut Baja Claws? I see they're a 23 degree V tread so was considering buying a set and cutting out every other lug. Anyone done it? |
|
| Author: | nitro_mudder [ Thu Dec 01, 2011 3:47 pm ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
I have looked into them, they look like a great pattern. The only problem is they don't come in very wide sizes. |
|
| Author: | Wanted_Fugitive [ Thu Dec 01, 2011 3:56 pm ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
I agree..In a 31'', 33'', or 35'' the widest they have is a 13.50 I think...Need to look it up to make sure. It wouldnt hurt to find a good source for tires and post it. Maybe some of the guys that have been working on buggies for a while can post a good site. |
|
| Author: | Eltrosteer [ Thu Dec 01, 2011 5:01 pm ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
My set of 33s are only ok, but my last set of claws were cut and they did pretty good. All I did was just sawall every other lug, if I remember right it took a couple of hours a tire |
|
| Author: | Crambo [ Thu Dec 01, 2011 8:59 pm ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
We run the baja claws with the small lugs cut out. like they said the only thing i wish for is a wider size. We have had great luck with them. |
|
| Author: | MartinB [ Fri Dec 02, 2011 4:12 am ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
Sounds good then, I'm looking for something narrower than my 15.5's as the places I ride are badly rutted by 4 x 4's |
|
| Author: | MartinB [ Thu Dec 08, 2011 5:38 am ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
Crambo wrote: We run the baja claws with the small lugs cut out. like they said the only thing i wish for is a wider size. We have had great luck with them. Do you have any photo's, or get some? I'd love to see cut ones before I take a cutter to a $500 pair of tires 
|
|
| Author: | Crambo [ Thu Dec 08, 2011 9:52 am ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
Hey yeah, i could'nt find any pictures, but i would be glad to take a couple of pics and post them. |
|
| Author: | MartinB [ Thu Dec 08, 2011 11:46 am ] |
| Post subject: | Re: Cut Mickey T Baja Claws |
Crambo wrote: Hey yeah, i could'nt find any pictures, but i would be glad to take a couple of pics and post them. That would be great!
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|