| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 2 Yamaha banshees one for woods and one for asphalt. http://woodsbuggy.com/phpBB3/viewtopic.php?f=27&t=5608 |
Page 1 of 1 |
| Author: | bssford460 [ Sun Jan 18, 2009 1:42 am ] |
| Post subject: | 2 Yamaha banshees one for woods and one for asphalt. |
I have 2 banshees. one is setup for fast trails and woods riding and the other is setup for asphalt drag racing. **********links for pics in the bottom of the post.*************** Here is info on the drag banshee. 04 frame is stock painted silver. its has a set of blue plastics with some pretty slick chrome stickers. its got some nice drag slicks on the stock back wheels and some small skinny tires on the front on some aftermarket smaller chrome wheels. front suspension is stock but the shocks have been adjusted waaay down to make the front end lower and very stiff.. the rear end is a chrome +6 lonestar swingarm. it has the stock front brakes the back brakes are in place but no fluid, so the brakes wont drag the back rotor. stock crank trued and welded. stage 4 port job by azcustoms i think. cool head with 17cc domes not sure what the reed valves are. but the reed cages were ported also. the carbs are either 34 or 35. and i dont know if they are pj or pwk. and twin K & N filters. and this one has dynatech programable ignition. ran 109 octane in it. here is info on the trails/woods banshee it is a 92 banshee frame powdercoated orange has a set of grey plastics, and a set of blue plastics that have been cut. stock white wheels blue hubs front and back. crappy tires on front, and very nice holeshots on the back, with plenty of tread left. now to the goods the engine has a wiseco hot rods racing crank, trued and welded of course the cylinders were bored by http://www.langcourt.com/index.htm, and have a set of Wiseco's matched to the cylinders the cylinders have a trinity racing stage II port job, and trinity stage II can be seen inscribed onto the exterior of the cylinders. It has a proDesign cool head to top things off with 20cc domes. It has the MSD programmable ignition . http://www.msdpowersports.com/atv_yamahabanshee.html which the holeshot feature is not hooked up but can be very easily set up for drag racing. Boyesen reed valves The carb tops on the stock carbs were very messed up so I removed them and purchased the a single carb kit. It has the 35mm pwk carb with a K&N filter. it has toomey T-4 pipes. they are painted black. they perform well but i think replacing them is about the only thing that this quad needs to make it really bad ass. It has a set of +2/=1 adjustable a-arms in the front with a set of dual rate works shocks. and a very very nice +4 rear swing arm. with a stock shock in back. all 3 shocks have shock wears on them. It has a set of DG nerfs with blue webbing. here is a pic of the drag racing banshee http://www.theresurrectionclan.com/foru ... 27-250.jpg and here are 2 pics of the woods/trails banshee one with grey fenders and one with the blue fenders. i still have both sets of fenders. the greys are on it now. http://www.theresurrectionclan.com/foru ... r/GP1a.JPG http://www.theresurrectionclan.com/foru ... r/BP1a.JPG |
|
| Author: | bssford460 [ Wed Jan 28, 2009 9:09 pm ] |
| Post subject: | Re: 2 Yamaha banshees one for woods and one for asphalt. |
$6000 gets both of them, if you dont want them.... just find me somebody that does.. lol they need to go so i can build my buggy. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
