| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Bshimmel's constant rebuild http://woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=16341 |
Page 1 of 2 |
| Author: | bshimmel [ Thu Nov 21, 2013 6:35 pm ] | ||||
| Post subject: | Bshimmel's constant rebuild | ||||
This is what I started with back in february first things I started off with were new tree bars and x brace the stuff I cut out was made from conduit Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | bshimmel [ Thu Nov 21, 2013 6:37 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | bshimmel [ Thu Nov 21, 2013 6:40 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Fixed the tie rod problem and rode it most of summer then had to replace the motor and get the trans rebuilt at the same time it has a 2.2 subaru with a 6 rib Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | bshimmel [ Thu Nov 21, 2013 6:43 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | bshimmel [ Thu Nov 21, 2013 6:45 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | bshimmel [ Thu Nov 21, 2013 6:48 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Swithced to a set of mad mikes 2x3s and getting his torsion eliminators and putting coil overs on it Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | bshimmel [ Thu Nov 21, 2013 6:50 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | aboone993 [ Thu Nov 21, 2013 7:30 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
I like it . looks good |
|
| Author: | darrell [ Thu Nov 21, 2013 7:35 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Looks really good .....nice work |
|
| Author: | Psycho Alpha [ Thu Nov 21, 2013 7:51 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Looks good!, but I thought you sold it?? Posted using the WoodsBuggy Mobile App |
|
| Author: | NRIbuggys [ Thu Nov 21, 2013 7:59 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Nice job Posted using the WoodsBuggy Mobile App |
|
| Author: | bshimmel [ Thu Nov 21, 2013 8:05 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Psycho Alpha wrote: Looks good!, but I thought you sold it?? Posted using the WoodsBuggy Mobile App I had it for sale but decided to keep it Posted using the WoodsBuggy Mobile App |
|
| Author: | Psycho Alpha [ Thu Nov 21, 2013 8:13 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
bshimmel wrote: Psycho Alpha wrote: Looks good!, but I thought you sold it?? Posted using the WoodsBuggy Mobile App I had it for sale but decided to keep it Posted using the WoodsBuggy Mobile App Sweet Posted using the WoodsBuggy Mobile App |
|
| Author: | davidk [ Thu Nov 21, 2013 8:59 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Looks sweet!! Posted using my iPhone |
|
| Author: | volksdude2007 [ Thu Nov 21, 2013 10:37 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Looks nice like the rear cage on it now I know when I had it I got carried away with cutter brake when I first put it in and slid the back right around into a tree and put a tweek to it |
|
| Author: | gasman [ Fri Nov 22, 2013 5:09 am ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Looks good. Are you going to weld some flanges to make the rear cage unbolt or just leave it welded solid? Chad |
|
| Author: | bshimmel [ Fri Nov 22, 2013 5:55 am ] |
| Post subject: | Re: Bshimmel's constant rebuild |
gasman wrote: Looks good. Are you going to weld some flanges to make the rear cage unbolt or just leave it welded solid? Chad Posted using the WoodsBuggy Mobile App Lol the ones going across the top will have the flanges |
|
| Author: | bshimmel [ Fri Nov 22, 2013 5:58 am ] |
| Post subject: | Re: Bshimmel's constant rebuild |
volksdude2007 wrote: Looks nice like the rear cage on it now I know when I had it I got carried away with cutter brake when I first put it in and slid the back right around into a tree and put a tweek to it The whole back of the frame being tweaked was part of the reason I was doing this it bothered me Posted using the WoodsBuggy Mobile App |
|
| Author: | volksdude2007 [ Fri Nov 22, 2013 5:49 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
I hear ya I wanted to do something with it too but at the time I had it I didn't have a welder bender or funds too do it I like what you have done with it though what did you do with the sawyer arms they still straight and good? |
|
| Author: | bshimmel [ Fri Nov 22, 2013 6:41 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
I broke the passenger arm but i got it straght and rewelded but I have no use for them Posted using the WoodsBuggy Mobile App |
|
| Author: | bshimmel [ Thu Nov 28, 2013 9:43 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Exhaust made computer mounted and skid plates Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | Psycho Alpha [ Thu Nov 28, 2013 10:08 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
I like the look of it. Posted using the WoodsBuggy Mobile App |
|
| Author: | bshimmel [ Fri Nov 29, 2013 1:30 am ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Psycho Alpha wrote: I like the look of it. Posted using the WoodsBuggy Mobile App Thanks. Hopefully I get a lot more done in the next week ill keep posting pics Posted using the WoodsBuggy Mobile App |
|
| Author: | bshimmel [ Mon Dec 09, 2013 6:55 pm ] | ||||
| Post subject: | Re: Bshimmel's constant rebuild | ||||
Elminators installed and my limit straps setup figured out my wheel travel and I wanna order my coil overs soon just need to weigh the car. Does anyone know where I could find scales? Posted using the WoodsBuggy Mobile App
|
|||||
| Author: | Psycho Alpha [ Mon Dec 09, 2013 7:24 pm ] |
| Post subject: | Re: Bshimmel's constant rebuild |
Are there any circle tracks around you? If so there should be a local race car shop around, those guys usually have them. Posted using the WoodsBuggy Mobile App |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|