| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| King pin spindle locks http://woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=8924 |
Page 1 of 1 |
| Author: | COOTERGUY [ Wed Mar 03, 2010 9:43 pm ] |
| Post subject: | King pin spindle locks |
Finally got to the point of installing my new locks and dust caps this evening in hopes of getting to take a little spin this weekend. Well the new ones came marked "L" and "R" one is left hand threads and the other is right hand threads. Problem now is that my buggy has two right hand threaded spindles. What is the deal is my buggy a weirdo or is the set threaded wrong? |
|
| Author: | nitro_mudder [ Thu Mar 04, 2010 1:32 am ] |
| Post subject: | Re: King pin spindle locks |
One is wrong, forward rotation should tighten the nut so that it does not spin off goiing down the road, or trails for us. Drivers side is Left hand thread. |
|
| Author: | COOTERGUY [ Thu Mar 04, 2010 8:24 am ] |
| Post subject: | Re: King pin spindle locks |
That is what I thought drivers side it always a left hand thread. Not on this one both are the same only thing I can figure is they may have trashed a spindle at some point and pressed it out and put a right hander back in its place. Has been a really aggravating find as I have to buy another set of billet locks now to finish my front end up. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|