| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Spindle Bearings http://woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=16783 |
Page 1 of 1 |
| Author: | bigDsmith [ Wed Mar 19, 2014 11:43 pm ] |
| Post subject: | Spindle Bearings |
I want to upgrade my front spindles from ball joint to either combo or King Kong spuds. Question is: Do they make bearings for the bigger spuds that will allow me to use my 4 lug ball joint drums? Sent from my Galaxy S3 using TapaTalk |
|
| Author: | jesse [ Thu Mar 20, 2014 12:32 am ] |
| Post subject: | Re: Spindle Bearings |
Just went threw all this you will need a wide five hub or rotor and buy a wheel adapter thays 5 to 4 |
|
| Author: | bigDsmith [ Thu Mar 20, 2014 9:53 am ] |
| Post subject: | Re: Spindle Bearings |
Hey Jesse, I here about wide 5 all the time. Just exactly what is wide a wide 5. Is it a standard race hub? Where do you get them? Sent from my Galaxy S3 using TapaTalk |
|
| Author: | jeff69 [ Thu Mar 20, 2014 12:37 pm ] |
| Post subject: | Re: Spindle Bearings |
I think the wide five is just a stock five lug Volkswagen hub or rim Sent from my iPhone using Tapatalk |
|
| Author: | Odyknuck [ Thu Mar 20, 2014 1:02 pm ] |
| Post subject: | Re: Spindle Bearings |
VW 200 mm stud pattern, not to be confused with late model dirt track wide 5. |
|
| Author: | Hunter71495 [ Thu Mar 20, 2014 5:35 pm ] |
| Post subject: | Re: Spindle Bearings |
5x205mm stud pattern |
|
| Author: | jesse [ Thu Mar 20, 2014 6:10 pm ] |
| Post subject: | Re: Spindle Bearings |
Wide five is just a kingpin hub they are five lug and baljoint is 4 |
|
| Author: | bigDsmith [ Thu Mar 20, 2014 6:34 pm ] |
| Post subject: | Re: Spindle Bearings |
So What I need is the old vw 5 lug hub and a combo spud with what bearings?? Sent from my Galaxy S3 using TapaTalk |
|
| Author: | jesse [ Thu Mar 20, 2014 7:55 pm ] |
| Post subject: | Re: Spindle Bearings |
This if im not mistaking let someone else confirm http://www.tweedsdesigns.com/img/pages/ ... shore.html |
|
| Author: | bluebuggy [ Thu Mar 20, 2014 8:28 pm ] |
| Post subject: | Re: Spindle Bearings |
You will need a hub something like this http://www.appletreeauto.com/BILLET-FRO ... AC407008C/ |
|
| Author: | jesse [ Thu Mar 20, 2014 9:08 pm ] |
| Post subject: | Re: Spindle Bearings |
You can run a stock hub just need right bearing but the ones liked look nice |
|
| Author: | MadMike [ Thu Mar 20, 2014 10:25 pm ] |
| Post subject: | Re: Spindle Bearings |
The bearings in the link above will work on both stock wide 5 drums and for the billet hub from Appletree. I am running the billet hubs on my Funco. |
|
| Author: | bigDsmith [ Fri Mar 21, 2014 10:27 pm ] |
| Post subject: | Re: Spindle Bearings |
Thanks guys. That's what I needed. Sent from my Galaxy S3 using TapaTalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|