EMPI Stub Axels SUCK! Did I say SUCK!
I have bent 2 of them and have broke 2 off at the flange. I now run Averys as they are made from stock OEM t-1 stubs.
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| empi stub axle http://woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=13650 |
Page 1 of 1 |
| Author: | aboone993 [ Sat May 12, 2012 3:44 pm ] |
| Post subject: | empi stub axle |
I have empi stub axles in my wife's buggy and my buggy . I have bent one in each buggy . I ran a modified German stub in my old buggy and never bent one . Is anyone else run into bending the empi ones and is there any one else that make them ? |
|
| Author: | nitro_mudder [ Sat May 12, 2012 5:29 pm ] |
| Post subject: | Re: empi stub axle |
I run the empi 930's and they have been fine on mine. Now the rotors are my weak area, lol. |
|
| Author: | MickeyMouse [ Sat May 12, 2012 6:40 pm ] |
| Post subject: | Re: empi stub axle |
I have not tried the Empi Stub Axles but I did have the Empi Axles and I broke both of them. I am on a mission to replace all of my Empi parts. Most of them have broken and I always try to replace them with something stronger. |
|
| Author: | Firebug [ Sat May 12, 2012 6:51 pm ] |
| Post subject: | Re: empi stub axle |
What cv you running? I have a pair of porsche that use Type 2 cv |
|
| Author: | goofydoofy [ Sun May 13, 2012 3:10 am ] |
| Post subject: | Re: empi stub axle |
Yea ii had problem with the empi type 2 stub axle but i didnt bend mine we snapped the threads right off of it with a buddys 1/2" battery impact and we barely even hit it with the impact. |
|
| Author: | hyde [ Sun May 13, 2012 10:54 am ] |
| Post subject: | Re: empi stub axle |
nitro_mudder wrote: I run the empi 930's and they have been fine on mine. Now the rotors are my weak area, lol. X2 |
|
| Author: | jayrod [ Sun May 13, 2012 12:05 pm ] |
| Post subject: | Re: empi stub axle |
I run the type 2's never had a problem. Even after smackin that tree backwards dont a hill and folding my rim in half. I replaced it just to be save. but the old one isnt bent so atleast i have a spare now. |
|
| Author: | aboone993 [ Sun May 13, 2012 4:32 pm ] |
| Post subject: | Re: empi stub axle |
Firebug wrote: What cv you running? I have a pair of porsche that use Type 2 cv type 2 |
|
| Author: | Odyknuck [ Mon May 14, 2012 8:27 am ] |
| Post subject: | Re: empi stub axle |
EMPI Stub Axels SUCK! Did I say SUCK! I have bent 2 of them and have broke 2 off at the flange. I now run Averys as they are made from stock OEM t-1 stubs.
|
|
| Author: | aboone993 [ Mon May 14, 2012 5:31 pm ] |
| Post subject: | Re: empi stub axle |
Odyknuck wrote: I now run Averys as they are made from stock OEM t-1 stubs. Good deal thanks for the info. |
|
| Author: | Odyknuck [ Mon May 14, 2012 10:34 pm ] |
| Post subject: | Re: empi stub axle |
BTW The Averys are cheaper than the EMPIs and with cores 40 more bucks cheaper. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|