| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| ive got a ? http://woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=12945 |
Page 1 of 1 |
| Author: | ridenrace6 [ Wed Jan 11, 2012 2:51 am ] |
| Post subject: | ive got a ? |
does anybody know if they make a double ended stud with 3/8-24 on one end and 8mm x 1.25 on the other end, if anybody knows if this type stud is made please let me know where i might find them i dont seem to be looking in the right places, if they even exist that is  
|
|
| Author: | jesse [ Wed Jan 11, 2012 3:20 am ] |
| Post subject: | Re: ive got a ? |
http://www.racebolt.com/tubular_bolts.htm i dont know exactly what im looking for lol but do you see it here |
|
| Author: | jesse [ Wed Jan 11, 2012 3:40 am ] |
| Post subject: | Re: ive got a ? |
http://www.fastenal.com/web/search/prod ... 53wr&Nty=0 |
|
| Author: | ridenrace6 [ Wed Jan 11, 2012 3:50 am ] |
| Post subject: | Re: ive got a ? |
i added a pic yeah jesse i already checked fastenal but all i found were same diameter with same or different thread pitch, and i need different diameter on each end |
|
| Author: | Odyknuck [ Wed Jan 11, 2012 10:31 am ] |
| Post subject: | Re: ive got a ? |
Have you tryed McMastercarr |
|
| Author: | MadMike [ Wed Jan 11, 2012 12:39 pm ] |
| Post subject: | Re: ive got a ? |
Best you'll get is 3/8-24 on one end and 3/8-16 at the other, same with 5/16. They can be made 
|
|
| Author: | rockrockets1 [ Wed Jan 11, 2012 6:52 pm ] |
| Post subject: | Re: ive got a ? |
Take a jug stud cut it off the length you want ,thread the other end with the 3/8 the other end will be 10 mm .I have done this to make longer bottom trans mt studs.Don't know if this helps or not |
|
| Author: | Aaron Creech [ Wed Jan 11, 2012 9:22 pm ] |
| Post subject: | Re: ive got a ? |
VW rocker studs are 10mm on one end and 8mm on the other! |
|
| Author: | Hunter71495 [ Wed Jan 11, 2012 9:45 pm ] |
| Post subject: | Re: ive got a ? |
My best guess would have been McMasterCarr also, other wise if you have access/knowledge make your own 
|
|
| Author: | ridenrace6 [ Thu Jan 12, 2012 5:55 am ] |
| Post subject: | Re: ive got a ? |
thanks for the input guys finally got the size i need figured out 3/8-24 on one end and 8mm x 1.25 on the other end probably have to get them made at a machine shop i guess |
|
| Author: | MadMike [ Thu Jan 12, 2012 1:08 pm ] |
| Post subject: | Re: ive got a ? |
What exactly are you trying to do? |
|
| Author: | ridenrace6 [ Thu Jan 12, 2012 7:19 pm ] |
| Post subject: | Re: ive got a ? |
MadMike wrote: What exactly are you trying to do? ive got a new set of cb performance bolt on valve covers im trying to use but the problem is the pauter rockers im also using, they come with bigger (3/8) and studs and barrel nuts and the rubber sleeve that comes with the valve covers is already a tight fit with the 8mm studs that they are meant for |
|
| Author: | kevin f [ Thu Jan 12, 2012 7:28 pm ] |
| Post subject: | Re: ive got a ? |
Goto pullapart and get a nissan valve cover, cut it down and jb weld it on there. It will be good. 
|
|
| Author: | ridenrace6 [ Thu Jan 12, 2012 7:31 pm ] |
| Post subject: | Re: ive got a ? |
kevin f wrote: Goto pullapart and get a nissan valve cover, cut it down and jb weld it on there. It will be good. i like him, but i aint as smart as dd lol
|
|
| Author: | Aaron Creech [ Thu Jan 12, 2012 8:35 pm ] |
| Post subject: | Re: ive got a ? |
Been there,done that. Just drill the cover out so a 3/8" stud will go through it. Then use early oil cooler seals around the studs. I tig welded the studs into the barrel nuts so that they would stop working loose and use locking type nuts. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|