I want to make a rafter elevator for my garage, i have way too much stuff and way too little space. And standing on top of a 6ft latter, with tires/wheels/anything is just not a good idea. I want to move all of my buggy stuff up there plus random crap.
I'm thinking the platform will be 20" wide and 48" long. I will use 1/2 plywood for deck and 2x4's for base.
I want to have 1 i-bolt per corner where the cable connects to. I was thinking of using 3/8 steel cable for the cables connecting the pulleys to what ever is on top of the garage.
This is where i need help, i have no idea how im going to lift the deck and keep it level and yet safe. I figure the platform it self will be 15 pounds alone and i would like to be able to lift a tranny at most. The working limit would prolly be 150 lbs.

I was thinking something like this just more balzy. I like how he has 2 of the corners coming to one point. I believe that i could fashion a cheap hf winch in the middle and lift equally. As for securing the pulley's at the top i could make a 2x4 frame for it so it would rest off of the rafters on both sides destituting the weight and same with the winch.
What do you think?