Here is my starting point, wish me luck!
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Arc Flatscreen Rewire http://woodsbuggy.com/phpBB3/viewtopic.php?f=18&t=8745 |
Page 1 of 1 |
| Author: | nitro_mudder [ Mon Feb 15, 2010 6:31 pm ] |
| Post subject: | Arc Flatscreen Rewire |
Here is my starting point, wish me luck!
|
|
| Author: | nitro_mudder [ Mon Feb 15, 2010 6:33 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
The good news is everything is color coded, RED!!!! |
|
| Author: | bmoore [ Mon Feb 15, 2010 6:38 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
good luck  im glad my wireing is done!
|
|
| Author: | Rick [ Mon Feb 15, 2010 6:52 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
are you mounting the arc fuss box, under that dash box? those arc switches are bad ass. I'm sure it will be fine  where did you decide to put the switch? good luck
|
|
| Author: | nitro_mudder [ Mon Feb 15, 2010 6:54 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
The fuse and relays will go in the center console for now. But all wires are getting labels for the next mod. |
|
| Author: | MickeyMouse [ Mon Feb 15, 2010 8:32 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
nitro_mudder wrote: The good news is everything is color coded, RED!!!! Yikes... Have fun with the nest... I used marine breakers instead of fuses and they have worked out very well. Good Luck. |
|
| Author: | nitro_mudder [ Wed Feb 17, 2010 9:37 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
OK here are some pics of where its at.   
|
|
| Author: | bmoore [ Wed Feb 17, 2010 9:42 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
you are making progress! lol |
|
| Author: | nitro_mudder [ Wed Feb 17, 2010 9:44 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
I'm spending too much time on this for just temporary |
|
| Author: | nitro_mudder [ Thu Feb 18, 2010 3:14 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Ok, got everything wired up, works great. I love this thing. Sucks having to figure out all the old wires, but I will get around to pulling them all and rewiring it. Got an ACC switch as a main, then a ign and a momentary start button. Follwed by 4 light switches and a CB and radio Switch. I ran an old ford heavy duty relay to turn the power on and off with a key, since I drive this on the road at times. Just tried it all out and works great! Now I just need to find a home for the switch pannel and run the ribbon cable. |
|
| Author: | Rick [ Thu Feb 18, 2010 5:01 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
are you using that solenoid as a continuous duty? if you are, make sure that it is a continuous. just as you said a hd solenoid from a ford. because they are not, and it wont last!!!!!! |
|
| Author: | nitro_mudder [ Thu Feb 18, 2010 6:46 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Ok, just checked dads catalog, its continuous duty, had me worried. 
|
|
| Author: | nitro_mudder [ Sun Feb 21, 2010 1:06 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
|
|
| Author: | MickeyMouse [ Sun Feb 21, 2010 6:39 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Nice job on the wiring... It looks great |
|
| Author: | nitro_mudder [ Sun Feb 21, 2010 6:49 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Thanks, I just wish it wasn't temporary, lol. |
|
| Author: | frankenbuggy06 [ Mon Feb 22, 2010 12:51 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Why's it temporary? |
|
| Author: | nitro_mudder [ Mon Feb 22, 2010 1:25 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Well I just put it in existing location, untill I have time to gut all the " through the frame" wiring and weld the holes up. And I want to mount it in the roof at that point. |
|
| Author: | hauser2169 [ Mon Feb 22, 2010 2:27 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
so where did you run your ribbon at. did you do anything to it to help protect it |
|
| Author: | nitro_mudder [ Mon Feb 22, 2010 2:38 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
It runs under my seat then up my side rails to the lower windsheild bar. I covered it in a layer of black duct tape to help protect it. Hope its enough
|
|
| Author: | hauser2169 [ Mon Feb 22, 2010 2:41 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
haha thats what i did. gotta love the duct tape. i was just wondering if there was anything else.. but thanks for the reply |
|
| Author: | Baddvw [ Tue Feb 23, 2010 6:49 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Nitro, you will need to weather proof your relay board somehow, these relays will act up and probably short out if they get any water and/or mud on them, put them in a ammo box if you can one day, it works like wonder Nice upgrade by the way 
|
|
| Author: | nitro_mudder [ Tue Feb 23, 2010 6:54 pm ] |
| Post subject: | Re: Arc Flatscreen Rewire |
Its in my center consol for now untill after this trip. Then I will work on redoing all the wires and finding it a better home. And I have up on 1/2" standoffs to keep it dryer. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|