im haven a probelm with my pionts they r not burnin up but it is fryin the wires on the points any ideas
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| detibiter problem http://woodsbuggy.com/phpBB3/viewtopic.php?f=18&t=5331 |
Page 1 of 1 |
| Author: | buggymaster [ Mon Dec 15, 2008 11:00 pm ] |
| Post subject: | detibiter problem |
im haven a probelm with my pionts they r not burnin up but it is fryin the wires on the points any ideas
|
|
| Author: | wildwillie [ Mon Dec 15, 2008 11:37 pm ] |
| Post subject: | Re: detibiter problem |
call suthern buggys iv had that happen befor he fixed it. |
|
| Author: | turboblue [ Tue Dec 16, 2008 7:01 pm ] |
| Post subject: | Re: detibiter problem |
buggymaster wrote: im haven a probelm with my pionts they r not burnin up but it is fryin the wires on the points any ideas You have the green wire from the condenser hooked to the positve side of the coil. It has to be on the negative side of the coil or it will melt the point wires. |
|
| Author: | buggymaster [ Wed Dec 17, 2008 12:06 am ] |
| Post subject: | Re: detibiter problem |
they r hooked up right but i think the coil is goin out its gettin really hot |
|
| Author: | Odyknuck [ Thu Dec 18, 2008 10:52 am ] |
| Post subject: | Re: detibiter problem |
Low Impendence coils require a ballest resister in series with the 12 V. Also check Condenser shorting, coil polarity or coil itself. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|