WoodsBuggy.com
http://woodsbuggy.com/phpBB3/

turn signal
http://woodsbuggy.com/phpBB3/viewtopic.php?f=18&t=4195		 Page 1 of 1
Author:  cyle [ Wed Jul 09, 2008 1:21 pm ]
Post subject:  turn signal
We are going to put turn signals on a bug and was wondering how to wire them up. We are going to use a three way toggle switch and two flashers.

Thanks cyle
Author:  turboblue [ Wed Jul 09, 2008 3:36 pm ]
Post subject:  Re: turn signal
cyle wrote:
We are going to put turn signals on a bug and was wondering how to wire them up. We are going to use a three way toggle switch and two flashers.

Thanks cyle



That's how we do it.

Switch needs to be off in center, on left or right.
Power up switch, left side of switch goes through one flasher then to the left front and rear lights.
Right side of switch goes through the other flasher then to the right front and rear lights.
Author:  purplerail [ Wed Jul 09, 2008 6:04 pm ]
Post subject:  Re: turn signal
its simple just call me i will tell ya how
Author:  TrackerCasey [ Tue Jul 29, 2008 7:23 pm ]
Post subject:  Re: turn signal
cyle wrote:
We are going to put turn signals on a bug and was wondering how to wire them up. We are going to use a three way toggle switch and two flashers.

Thanks cyle

You can use a single flasher by just flashing the main hot wire.
Author:  turboblue [ Wed Jul 30, 2008 10:40 am ]
Post subject:  Re: turn signal
TrackerCasey wrote:
cyle wrote:
We are going to put turn signals on a bug and was wondering how to wire them up. We are going to use a three way toggle switch and two flashers.

Thanks cyle

You can use a single flasher by just flashing the main hot wire.


Then the flasher is powered up constantly.
Author:  RailHomie [ Thu Jul 31, 2008 8:31 am ]
Post subject:  Re: turn signal
turboblue wrote:
Then the flasher is powered up constantly.


I wouldn't think so, as long as it's an open circuit it won't do anything.
As long as you're going from the batt+ -> flasher-> switch. Just don't ground the center position of the switch (wouldn't want to do that either way).
Author:  turboblue [ Thu Jul 31, 2008 3:50 pm ]
Post subject:  Re: turn signal
RailHomie wrote:
turboblue wrote:
Then the flasher is powered up constantly.


I wouldn't think so, as long as it's an open circuit it won't do anything.
As long as you're going from the batt+ -> flasher-> switch. Just don't ground the center position of the switch (wouldn't want to do that either way).


Yeah that's right now that I thing about it.
Either way works......... 8)
Author:  MickeyMouse [ Thu Aug 14, 2008 12:46 am ]
Post subject:  Re: turn signal
Depending on why you want blinkers, you might want to consider a $14 universal blinker switch. If you are hoping to make the buggy street legal, most states require hazard flashers. I do not think you will be able to do hazards with toggle switch idea.

In addition, you can run a single tail lights integrated in with the brake switch. Less lights to buy and mount on the back of the buggy.

Just another idea.

Dan
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/