Might be the problem, got stuck last year too. Maybe after I grind the welds down it will slide in and out easier
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 930 cv problem http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=9458 |
Page 1 of 1 |
| Author: | nitro_mudder [ Wed May 12, 2010 8:06 pm ] |
| Post subject: | 930 cv problem |
Got a 930 cv that is stuck in the stub axle. I have the inner race and balls out to work on it, but no luck. any ideas? |
|
| Author: | MadMike [ Wed May 12, 2010 8:15 pm ] |
| Post subject: | Re: 930 cv problem |
Can't believe I'm saying this.............Get a bigger hammer. And maybe a block of wood, it's hammer time. |
|
| Author: | nitro_mudder [ Wed May 12, 2010 8:34 pm ] |
| Post subject: | Re: 930 cv problem |
Not sure I wanna admit what I had to do to get it off, lol. But it worked. |
|
| Author: | A. Cole [ Wed May 12, 2010 9:17 pm ] |
| Post subject: | Re: 930 cv problem |
MadMike wrote: Can't believe I'm saying this.............Get a bigger hammer. And maybe a block of wood, it's hammer time. At least it didn't come out without thinking about it. I had some latest rage 930 stubs that had to get machined down a touch so the cv didn't get stuck. Sounds like the case. |
|
| Author: | nitro_mudder [ Wed May 12, 2010 9:30 pm ] |
| Post subject: | Re: 930 cv problem |
Might be the problem, got stuck last year too. Maybe after I grind the welds down it will slide in and out easier
|
|
| Author: | MadMike [ Wed May 12, 2010 9:39 pm ] |
| Post subject: | Re: 930 cv problem |
Welds on what? |
|
| Author: | nitro_mudder [ Wed May 12, 2010 9:52 pm ] |
| Post subject: | Re: 930 cv problem |
MadMike wrote: Welds on what? Ummmmmm, oh nothing, don't worry about it 
|
|
| Author: | A. Cole [ Wed May 12, 2010 10:13 pm ] |
| Post subject: | Re: 930 cv problem |
hell, my first buggy had the spring plates welded to the trailing arm. (not by me) You know, If you weld it you don't have to worry about the bolts coming loose.
|
|
| Author: | kybuggy1 [ Thu May 13, 2010 2:27 am ] |
| Post subject: | Re: 930 cv problem |
nitro_mudder wrote: MadMike wrote: Welds on what? Ummmmmm, oh nothing, don't worry about it Give it, Nitro. We all want a good chuckle.....what did you have to do to get the outer off the stub?? 
|
|
| Author: | nitro_mudder [ Thu May 13, 2010 7:43 am ] |
| Post subject: | Re: 930 cv problem |
Had to weld 2 tabs on it so I could use my gear puller on it. Still didn't come off easy. |
|
| Author: | kybuggy1 [ Thu May 13, 2010 7:54 am ] |
| Post subject: | Re: 930 cv problem |
| DAmn! I've had to thump 'em pretty good with a hammer from time to time, but nothing like that. Waterpumper leak on it n make it rust in place?   j/k, glad it worked out. 
|
|
| Author: | nitro_mudder [ Thu May 13, 2010 8:21 am ] |
| Post subject: | Re: 930 cv problem |
kybuggy1 wrote: :shock: DAmn! I've had to thump 'em pretty good with a hammer from time to time, but nothing like that. Waterpumper leak on it n make it rust in place? j/k, glad it worked out. I think it was a rust issue. Thought I put anti-sieze on it last yr. Must not have. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|