I know a guy that drag races with a BM disc and a Stage 1 or 2, depending on track conditions.
10.85 index full bodied pan car, turbo and a fair amount of HP.
Works for him........
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Black magic iron disc http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=6935 |
Page 1 of 1 |
| Author: | Kyle [ Fri Jun 19, 2009 3:25 pm ] |
| Post subject: | Black magic iron disc |
Anyone ran one of these clutches? Its suppsoed to grab like a 4 puck but it is designed to slightly slip at first then heat makes it grab. (This all happens instantly I guess). They say stick with a stage 1 PP which is what I have. I need something better the new more power motor is killing the cushlock/ST1 PP combo. |
|
| Author: | kyjr.buggy1 [ Fri Jun 19, 2009 5:38 pm ] |
| Post subject: | Re: Black magic iron disc |
I've heard of em, I think alot of drag racers use em so it's not as hard on their drivetrain. I'm also curious how it'd do in the woods. -Dakotah/koko |
|
| Author: | chris38375 [ Fri Jun 19, 2009 5:44 pm ] |
| Post subject: | Re: Black magic iron disc |
use a 6 puck brass clutch,they work great |
|
| Author: | turboblue [ Fri Jun 19, 2009 6:52 pm ] |
| Post subject: | Re: Black magic iron disc |
I know a guy that drag races with a BM disc and a Stage 1 or 2, depending on track conditions. 10.85 index full bodied pan car, turbo and a fair amount of HP. Works for him........
|
|
| Author: | Baddvw [ Fri Jun 19, 2009 11:28 pm ] |
| Post subject: | Re: Black magic iron disc |
I use a 4-puck and a stage 1 pp this combo works very well with the light buggies I am going to put in a stage 2 pp soon with a new clutch. |
|
| Author: | hillaholic [ Fri Jun 19, 2009 11:48 pm ] |
| Post subject: | Re: Black magic iron disc |
Never ran one but not sure if you saw this. http://www.thesamba.com/vw/classifieds/ ... ?id=743370 LowBugget has the Black Magic Iron Discs. The Black Magic Iron Disc will slip/hook. What it will do is slip at first, then build heat and grab ASAP! This all takes place in a mill sec and will help save your transmission. Unlike a 4-puck if it keep sliping you would toss it in the trash. With a Black Magic Iron Disc you can blast it with a sand blaster and bring it back to new! This is one of those performance parts that you will buy only once! Recommended: Kennedy Stage 1 pressure plate. (do not use or need a stage 2 with this disc. we have used this disc with stage1 and made over 270tq ) On Sale $139.99 each not $189 like some others!!!! I wonder how long it lasts between having to sand blast it. |
|
| Author: | Kyle [ Sat Jun 20, 2009 9:02 am ] |
| Post subject: | Re: Black magic iron disc |
Hey brad yea that where I was seeing them at LBC. I was wondering the same thing also about how long it I'll last between "cleaning". The 4 pucks break trannies I don't think I want one plus if you slip a puck disc and get it hot it's done. That's where I think this one might work good. Looks like it's going to be worth a try. |
|
| Author: | Baddvw [ Sat Jun 20, 2009 2:50 pm ] |
| Post subject: | Re: Black magic iron disc |
You should'nt have to slip the 4-puck clutch just rev then go, I think slipping the clutch kills them no matter what kind you have. They should'nt break transmissions either, it just depends on how the transmission is built, if you have a stock transmission and bus axles, maybe they will break, but so far, nothing yet. |
|
| Author: | kybuggy1 [ Mon Jun 22, 2009 12:13 am ] |
| Post subject: | Re: Black magic iron disc |
chris38375 wrote: use a 6 puck brass clutch,they work great I agree. They are killer. Grabs like a 4 puck, but you can slip it without the chatter. With a stage 4 pp. Larry |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|