WoodsBuggy.com
http://woodsbuggy.com/phpBB3/

Rebuilding transmission
http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=6753		 Page 1 of 1
Author:  buggykaz [ Sun May 31, 2009 10:43 am ]
Post subject:  Rebuilding transmission
I have 5 rib tran,should i attempt to rebuild it? If not who rebuilds and where do I get parts?
Author:  plumberbill [ Sun May 31, 2009 10:50 am ]
Post subject:  Re: Rebuilding transmission
where are you located
Author:  buggykaz [ Sun May 31, 2009 11:05 am ]
Post subject:  Re: Rebuilding transmission
plumberbill wrote:
where are you located

camp at oaktree A40
Author:  plumberbill [ Mon Jun 01, 2009 8:59 am ]
Post subject:  Re: Rebuilding transmission
brian aka buggyb here on woodsbuggy does good work. akron canton area.
Author:  RaceBugg1098 [ Mon Jun 01, 2009 10:37 am ]
Post subject:  Re: Rebuilding transmission
unless you plan on doing a bunch, its not worth buying the tools.
Author:  afterburnt [ Wed Jun 03, 2009 5:21 pm ]
Post subject:  Re: Rebuilding transmission
I have rebuilt my own tranies 3 or 4 times. the last time i blew it up, i talked to brian in canton, and he told me what to order from weddle, and when i recieved the parts i brought the parts and the tranny to his house, and he charged me about 175 bucks, what a deal. thats the way i would go.
Author:  Odyknuck [ Thu Jun 11, 2009 2:34 pm ]
Post subject:  Re: Rebuilding transmission
A wise man once said "There are some things best left to the experts"! I will leave it at that.
Author:  RaceBugg1098 [ Fri Jun 12, 2009 8:07 am ]
Post subject:  Re: Rebuilding transmission
I have rebuilt a half a dozen or so, but I won't do it any more. There is a hell of lot more to it than just boltin parts in it. This is the reason that I sent mine to Rancho. Thats all they do. everyday. build transaxles. I'm NOT saying that your local tranny guy isn't good, its just piece of mind going where all the "big boys" get theres built. It was $100 each way to ship, so I had to call it "parts for work" to ship it one way free :mrgreen: Then they charge $200 for all the labor and seals and I think some of the bearings. Last time I built my tranny, I missed a VERY small flaw in an unsuspecting bearing and it wiped out a $1000 gear set. :x
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/