you can lead em to water rock, but..........
| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| trans qustion http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=6252 |
Page 1 of 1 |
| Author: | tanner2803 [ Sun Apr 05, 2009 10:42 pm ] |
| Post subject: | trans qustion |
my 6 rib trans keeps popping out of reverse and has a slight grinding noise when it dose so..... the rest of the gears are fine any help....?? thanks tanner |
|
| Author: | rockrockets1 [ Sun Apr 05, 2009 11:05 pm ] |
| Post subject: | Re: trans qustion |
is the shifter adjusted so it goes all the way in ? make shure of this ,take the shifter rod loose to check it if it is in all the way and it still jumps out ,PUT IN A NEW REVERSE GEAR |
|
| Author: | tanner2803 [ Sun Apr 05, 2009 11:19 pm ] |
| Post subject: | Re: trans qustion |
how hard is it to replace the revrse gear,,,,, could i do it... or not..?? |
|
| Author: | instigator [ Mon Apr 06, 2009 6:14 am ] |
| Post subject: | Re: trans qustion |
first if you still have rev. no need to replace it. you have a linkage problem. take your shifter lose and slide it as far forward as you can. see if this helps. did you have it before powder coating? is it a stock shifter? let us know |
|
| Author: | tanner2803 [ Mon Apr 06, 2009 9:07 am ] |
| Post subject: | Re: trans qustion |
the guy who was going to powder coat oven broke and wasnt going to be done with it in time for d&k so i had to spray paint it..... for now and ill try with unhookin the linkage ill let you know |
|
| Author: | buggiejunky [ Mon Apr 06, 2009 3:33 pm ] |
| Post subject: | Re: trans qustion |
just cause it still works doesnt mean its any good ive have pulled them apart and all the teeth were almost side ways on the little gear and the teeth on the 1 2 slider were half way gone it could be an external shift linkage problem but it could be the linkage inside has moved also |
|
| Author: | tanner2803 [ Mon Apr 06, 2009 9:04 pm ] |
| Post subject: | Re: trans qustion |
you where right it was the lingage i got it fixed thanks |
|
| Author: | rockrockets1 [ Mon Apr 06, 2009 11:25 pm ] |
| Post subject: | Re: trans qustion |
is the shifter adjusted so it goes all the way in ? make shure of this ain't this what I said 3 or 4 post ago |
|
| Author: | rockrockets1 [ Mon Apr 06, 2009 11:26 pm ] |
| Post subject: | Re: trans qustion |
rockrockets1 wrote: is the shifter adjusted so it goes all the way in ? make shure of this ,take the shifter rod loose to check it if it is in all the way and it still jumps out ,PUT IN A NEW REVERSE GEAR
|
|
| Author: | Kyle [ Tue Apr 07, 2009 6:18 am ] |
| Post subject: | Re: trans qustion |
you can lead em to water rock, but..........
|
|
| Author: | Firebug [ Tue Apr 07, 2009 7:21 am ] |
| Post subject: | Re: trans qustion |
Tanner followed Rock's advice and checked the linkage,,,good job Tanner,,,see you at the Easter Hill Climb |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|