| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Hydraulic Clutch Questions http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=16421 |
Page 1 of 1 |
| Author: | Sandbar Norm [ Tue Dec 10, 2013 9:57 am ] |
| Post subject: | Hydraulic Clutch Questions |
Hi guys, I having some problems with my clutch slipping. I have the 1st peddle assembly/slave on this page. (not the best but I thought it would work for a while). http://www.dansperformanceparts.com/bug ... ytcbh2.htm It releases at the top of the travel (about 1" to 1-1/2" from the top). I have adjusted the cly. from the shortest length to 2-1/2 inch longer. It doesn't seem to change the release position (still at the top) When I make it longer, all it seem to do is push the piston farther into the cly. This gives it a shorter stroke but it never gets free or loose. Any suggestion before I buy a different cly? Norm |
|
| Author: | lngtrvl2332 [ Tue Dec 10, 2013 10:04 am ] |
| Post subject: | Re: Hydraulic Clutch Questions |
Is the clutch master cylinder 3/4 bore? That is the size they recommend for the slave cylinder. Slave cylinder should be adjusted so that it is not loose but clutch lever is completely disengaged... |
|
| Author: | Sandbar Norm [ Tue Dec 10, 2013 10:20 am ] |
| Post subject: | Re: Hydraulic Clutch Questions |
Yes it 3/4" bore. It never gets loose. It just pushes the piston in or pulls it out when I adjust it. I'm using the stock cable mount on the trans. After writing it down I'm thinking that maybe it in a bind and that why the piston is getting pushed in. I'm not sure. |
|
| Author: | lngtrvl2332 [ Tue Dec 10, 2013 3:04 pm ] |
| Post subject: | Re: Hydraulic Clutch Questions |
My buddies buggy did something like what you are describing and we ended up changing the slave cylinder and it fixed the problem. |
|
| Author: | Roy [ Fri Dec 13, 2013 9:18 am ] |
| Post subject: | Re: Hydraulic Clutch Questions |
I have a brand new CNC hydraulic slave cylinder I will sell you at a discount. My new buggy has a cable clutch so I really don't need this thing sitting around. PM me if interested. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|