| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 930 swap question http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=15416 |
Page 1 of 1 |
| Author: | volksdude2007 [ Wed May 15, 2013 7:36 pm ] |
| Post subject: | 930 swap question |
My brother wanted me to post this question since he is working he is wanting to do his 930 swap by this weekend he has stub axles and was going to order the rest of the stuff but before doing so will his stock axles work with 930 CVS or are the bigger diff splines on the axle? Thanks fellas |
|
| Author: | davehix [ Wed May 15, 2013 8:07 pm ] |
| Post subject: | Re: 930 swap question |
Different splines . |
|
| Author: | volksdude2007 [ Wed May 15, 2013 8:16 pm ] |
| Post subject: | Re: 930 swap question |
Thanks for the answer |
|
| Author: | volksdude2010 [ Wed May 15, 2013 8:24 pm ] |
| Post subject: | Re: 930 swap question |
ok so where can i get the axles from and the cheaper the better but want quality that will hold up |
|
| Author: | volksdude2010 [ Wed May 15, 2013 8:44 pm ] |
| Post subject: | Re: 930 swap question |
i i was told there is 18 3/4 and 19 1/4 axles i have aplletree 2x3 witch ones would i neeed any info would be appreciated |
|
| Author: | MadMike [ Wed May 15, 2013 9:04 pm ] |
| Post subject: | Re: 930 swap question |
volksdude2010 wrote: ok so where can i get the axles from and the cheaper the better but want quality that will hold up Can't have both. Quality costs $$$ and if your into cheap China crap Appletree is a good place to start. What is he doing about drive flanges, boots and bolts? The axle length he is using now would be the same for the 930 |
|
| Author: | volksdude2010 [ Wed May 15, 2013 9:17 pm ] |
| Post subject: | Re: 930 swap question |
are apple trees that bad i thought they were decent trailing arms but every one says diffrent and so i still want 18 3/4 axles and all i have right now is the stub axles china made |
|
| Author: | volksdude2010 [ Sun Jun 16, 2013 11:47 am ] |
| Post subject: | Re: 930 swap question |
i have been lookinf for axles kits and they seem to only mention 15 5/8 and 19 1/4 for stock or 3x3 cant seem to find 18 3/4 what i have now |
|
| Author: | gasman [ Sun Jun 16, 2013 4:34 pm ] |
| Post subject: | Re: 930 swap question |
You will also need the 930 drive flanges for the trans. |
|
| Author: | bige70chevy [ Sun Jun 16, 2013 6:38 pm ] |
| Post subject: | Re: 930 swap question |
the apple tree arms are not too bad, they do need boxed...the kit they sell comes with all china empi junk....stubs,flanges axles,cv joints etc....the biggest problem is that the empi axles fit the empi cv joints very loose at the splines. they jerk bad between shifts and on/off/on throttle.....i ended up buying 4 lobro cv joints and it at least fixed that problem....before i bought the lobros i sent empi axles and cv joints back to appletree 2 times and they never sent back a set that the splines werent screwed up on them....on a positive note if you tear up just one trailing arm and need a replacement,they build them in house and will sell just one |
|
| Author: | volksdude2010 [ Sun Jun 16, 2013 6:51 pm ] |
| Post subject: | Re: 930 swap question |
ya my brother is gonna buy my the drive flanges for my axles and cvs and type 2 stub axles but got to find 18 3/4 for 2x3 see kits for 3x3 but none for the 2x3 |
|
| Author: | jesse [ Tue Jun 18, 2013 1:12 pm ] |
| Post subject: | Re: 930 swap question |
axles here scroll down to them http://www.dansperformanceparts.com/bug ... %20IRS.htm |
|
| Author: | volksdude2010 [ Sun Jun 23, 2013 11:29 pm ] |
| Post subject: | Re: 930 swap question |
jesse wrote: thx for the link jesse will probaly also get torsion elimnators from them also |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|