| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 091 nosecone transaxle http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=11645 |
Page 1 of 1 |
| Author: | 3drinkminimum [ Thu Apr 28, 2011 7:54 am ] |
| Post subject: | 091 nosecone transaxle |
anyone know what years these were used? need a new starter solenoid.... was told the starter in my trans is from an auto stick even though its an 091... even have the receipt where previous owner bought it at la products... no mods to bell it was supposedly done due to that starter having more torque... but since i wanna replace it i need to know the years the nosecone 091 was used or atleast the applications the 091 was used in... i have seen it here on this site somewhere with a listing of r&pcodes and what transaxles had stock superdiff... if anyone remembers where that info is or just knows the info so i dont have to get a 250dollar high torque for the 091 it would be great... til then i got a foundation to pour for my house today then i can put more time into finding the info... |
|
| Author: | bluebuggy [ Thu Apr 28, 2011 8:34 am ] |
| Post subject: | Re: 091 nosecone transaxle |
Look at this http://www.woodsbuggy.com/index.php?opt ... 17&t=11144 I run the same trans and got my 120 in this setup |
|
| Author: | chris38375 [ Thu Apr 28, 2011 10:41 am ] |
| Post subject: | Re: 091 nosecone transaxle |
77-79 i know them are 091 but i think u can use all the way up to 82,,,i think |
|
| Author: | Aaron Creech [ Tue May 03, 2011 7:41 pm ] |
| Post subject: | Re: 091 nosecone transaxle |
If it really has an autostick starter on it the bell housing has been changed to an 002 style or the 091 has been machined down in the starter pocket area.The autostick starter is self supporting meaning it has no shaft sticking out past the gear.If that is what you have you can use any type 1 starter or another autostick. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|