| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| 3 RIB TRANS http://woodsbuggy.com/phpBB3/viewtopic.php?f=12&t=11429 |
Page 1 of 1 |
| Author: | blzrgb [ Thu Mar 17, 2011 3:12 pm ] |
| Post subject: | 3 RIB TRANS |
I'm running a 3 rib with a super shifter and pretty much have to adjust for reverse every time I ride. 1st-4th gear's shift fine. Anyone had this problem or an idea on what the problem could be? |
|
| Author: | bmoore [ Thu Mar 17, 2011 8:42 pm ] |
| Post subject: | Re: 3 RIB TRANS |
this may or may not help, but i set my shift linkage in the reverse gear! ive always heard set your linkage with the trans and shifter in the reverse gear, if reverse is rite the rest will be. this has always worked for me  but there are variables, like shifter or linkage wear
|
|
| Author: | blzrgb [ Thu Mar 17, 2011 10:59 pm ] |
| Post subject: | Re: 3 RIB TRANS |
Thanks, that will prbly help. I'll try that tomorrow. Also, this evening I noticed that the shift shaft sticking Out the nose cone has a lot of flop in it. Could it be a bushing wore out Causing some of my headache ? |
|
| Author: | bmoore [ Thu Mar 17, 2011 11:20 pm ] |
| Post subject: | Re: 3 RIB TRANS |
blzrgb wrote: Thanks, that will prbly help. I'll try that tomorrow. Also, this evening I noticed that the shift shaft sticking Out the nose cone has a lot of flop in it. Could it be a bushing wore out Causing some of my headache ? yes! any slop in your linkage can cause a problem |
|
| Author: | blzrgb [ Sat Mar 19, 2011 12:04 am ] |
| Post subject: | Re: 3 RIB TRANS |
Bushings and a better adjustment Fixed it. Thanks ! |
|
| Author: | bmoore [ Sat Mar 19, 2011 12:43 am ] |
| Post subject: | Re: 3 RIB TRANS |
blzrgb wrote: Bushings and a better adjustment Fixed it. Thanks ! your welcome! glad i could help! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|