| WoodsBuggy.com http://woodsbuggy.com/phpBB3/ |
|
| Best master cylinders http://woodsbuggy.com/phpBB3/viewtopic.php?f=10&t=4696 |
Page 1 of 1 |
| Author: | spectater [ Mon Sep 15, 2008 10:11 pm ] |
| Post subject: | Best master cylinders |
Need some input from ya'll, I don't know wether to go with the CNC pedals and master cylinders or the Wilwood set up. When it comes to brakes I don't mind spending a little extra for top quallity!! Going is important but stopping is real important!! Or if there are any better options other than the ones I mentioned let me know! |
|
| Author: | afterburnt [ Fri Sep 19, 2008 9:37 pm ] |
| Post subject: | Re: Best master cylinders |
I use wilwood master cylinders. the rear one is a square one and the front one is the round one. I swear they look identical to CNC and jammer's. what i did, is i went to summit, bought the wilwood cause it was a better price. |
|
| Author: | spectater [ Sat Sep 20, 2008 5:45 pm ] |
| Post subject: | Re: Best master cylinders |
I've looked at both since I first posted this, and they look to be about the same? probably not much difference in them. Think i will go with the Willwood. |
|
| Author: | turboblue [ Mon Sep 22, 2008 12:50 pm ] |
| Post subject: | Re: Best master cylinders |
spectater wrote: I've looked at both since I first posted this, and they look to be about the same? probably not much difference in them. Think i will go with the Willwood. Be sure of the availability of rebuild kits before you choose. Hopefully you will never need to but just in case............... 
|
|
| Author: | spectater [ Tue Sep 23, 2008 2:35 pm ] |
| Post subject: | Re: Best master cylinders |
Good point!! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|