Hello guys, today I've had a pretty poor experience with CNC Inc. Just to run y'all through my setup I had wilwood master cylinder for the clutch and the rear brakes.
I decided to switch to 4 wheel brakes and I went and bought CNC master cylinders. The brake setup I have had zero problems with and still work perfectly and look brand new. On the other hand the clutch right out of the package leaked severely out of the secondary seal and I had to send it back for them to repair. I figured it was no big deal mistakes get made no problems. They got it fixed and sent it back, about 6 months later it started leaking again, once again sent it back to them and they got it repaired I asked them why it was leaking they said that the rear seal had shrank due to " outside contaminants". Even though the brake setup is literally right next to it as you can see in the picture posted , and is still in perfect shape and never had any problems or leaks.
On the other hand I have had very good experience with Wilwood equipment the setup that was on it was on it for 6 years no problems at all I still use it as a back up as you can see in the picture below
I know people make mistakes but I felt like the way they handled this was kinda poor trying to pass the blame , I plan on pulling it apart and double checking their work and making sure the cylindar is honed out correctly when I get it back.
I don't know if anyone has had this experience with this or I'm just cursed or something but I figured I would share my experience.
Sent from my SAMSUNG-SM-G900A using Tapatalk